User Guide

66
The LLDP-MED TLVs to be advertised can be selected in the LLDP MED Port Settings page, and
the management address TLV of the device may be configured to be advertised.
To configure the LLDP port settings:
1. Click
Configuration > Port Management > Discovery – LLDP > Feature Configuration
.
The following fields are displayed (only fields that do not appear in the Edit page are
described):
•
Interface—The port to edit.
•
LLDP MED Status—Enabled or disabled.
•
Number of neighbors—Number of neighbors discovered.
•
Neighbor Capability—Displays the primary functions of the neighbor; for example:
Bridge or Router.
•
Local PoE—Local PoE information advertised.
o
power priority—Port power priority
o
power value—Port power value
•
Neighbor PoE—PoE information advertised by the neighbor.
o
power priority—Port power priority
o
power value—Port power value
2. Enter the following fields.
•
LLDP Status—Select to enable LLDP on the device (enabled by default).
•
LLDP Frame Handling—If LLDP is not enabled, select the action to be taken if a
packet that matches the selected criteria is received:
o
Filtering—Delete the packet.
o
Flooding—Forward the packet to all VLAN members.
3. Select a port and click Edit.
•
Port—Select the port to edit.
•
LLDP Status—Select the LLDP publishing option for the port. The values are:
o
Tx Only—Publishes but does not discover.
o
Rx Only—Discovers but does not publish.
o
Tx & Rx—Publishes and discovers.
o
Disable—Indicates that LLDP is disabled on the port.
•
Available Optional TLVs—Information to be published by the device.
•
Advertise Optional TLVs—Select the information to be published by the device by
moving the TLV from the Available Optional TLVs list. The available TLVs contain
the following information: