User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
71
o
Endpoint Class 2—Media endpoint class, offering media streaming
capabilities, as well as all Class 1 features.
o
Endpoint Class 3—Communications device class, offering all Class 1 and
Class 2 features plus location, 911, Layer 2 device support, and device
information management capabilities.
o
PoE Device Type—Port PoE type; for example, powered.
o
PoE Power Source—Port power source.
o
PoE Power Priority—Port power priority.
o
PoE Power Value—Port power value.
o
Hardware Revision—Hardware version.
o
Firmware Revision—Firmware version.
o
Software Revision—Software version.
o
Serial Number—Device serial number.
o
Manufacturer Name—Device manufacturer name.
o
Model Name—Device model name.
o
Asset ID—Asset ID.
•
Location Information
o
Civic—Street address.
o
Coordinates—Map coordinates: latitude, longitude, and altitude.
o
ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
•
Network Policy
o
Application Type—Network policy application type; for example, Voice.
o
VLAN ID—VLAN ID for which the network policy is defined.
o
VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
-
Tagged—Indicates the network policy is defined for tagged VLANs.
-
Untagged—Indicates the network policy is defined for untagged
VLANs.
o
User Priority—Network policy user priority.
o
DSCP—Network policy DSCP.