User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
91
To configure Telephony OUI on an interface:
1.
Click
Configuration > VLAN Management > Voice VLAN > Telephony OUI Interfaces
.
2.
To configure an interface to be a candidate port of the telephony OUI-based voice VLAN,
click Edit.
3.
Enter the values for the following fields:
•
Interface—Select an interface.
•
Telephony OUI VLAN—If enabled, the interface is a candidate port of the
telephony OUI based voice VLAN. When packets that match one of the configured
telephony OUI are received, the port is added to the voice VLAN.
•
QoS Mode—Select one of the following options:
o
All—QoS attributes are applied on all packets that are classified to the
Voice VLAN.
o
Telephony Source MAC Address—QoS attributes are applied only on
packets from IP phones.
4.
Click Apply.