User Guide
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
105
IP
Address
Enter the IP address or the host name of the station you want the Switch to
ping to.
Count Enter the number of ping to send. The range is from 1 to 5 and the default is 4.
Interval Enter the number of seconds between pings sent. The range is from 1 to 5 and
the default is 1.
Size Enter the size of ping packet to send. The range is from 8 to 5120 and the
default is 56.
Result Displays the ping test results.
Click Test to perform the ping test.
IPv6 Ping Test
Send a ping request to a specified IPv6 address. Check whether the Switch can communicate
with a particular network host before testing.
You can vary the test parameters by entering the data in the appropriate boxes. To verify
accuracy of the test, it is recommended that you run multiple tests in case of a test fault or user
error.