Owner's Manual

103
Click the Apply button to accept the changes or the Cancel button to discard them.
Log Table
This page displays the most recent records in the Switch's internal log. Log entries are listed in
reverse chronological order (with the latest logs at the top of the list). Click a column header to
sort the contents by that category.
Display logs in
•
RAM: The information stored in the system’s RAM log will be lost after the Switch is
rebooted or powered off
•
Flash: The information stored in the system’s Flash will be kept effective even if the
Switch is rebooted or powered off.
Type
•
Switch: Display switch related logs.
•
All: Display logs for both controller and switch.
Export: Click Export button to export the current buffered log to a .txt file.
Clear: Click Clear button to clear the buffered log in the system's memory.
Diagnostics
Cable Diagnostics
Cable Diagnostics helps you to detect whether your cable has connectivity problems provides
information about where errors have occurred in the cable. The tests use Time Domain
Reflectometry (TDR) technology to test the quality of a copper cable attached to a port. TDR
detects a cable fault by sending a signal through the cable and reading the signal that is reflected
back. All or part of the signal is reflected back either by cable defects or by the end of the cable
when an issue is present. Cables are tested when the ports are in the down state, with the
exception of the cable length test.