Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
106
IP Address Enter the IPv6 address or the host name of the station you want the Switch
to ping to.
Count Enter the number of ping to send. The range is from 1 to 5 and the default is
4.
Interval Enter the number of seconds between pings sent. The range is from 1 to 5
and the default is 1.
Size Enter the size of ping packet to send. The range is from 8 to 5120 and the
default is 56.
Result Displays the ping test results.
Click Test to perform the ping test.
Trace Route
The traceroute feature is used to discover the routes that packets take when traveling to their
destination. It will list all the routers it passes through until it reaches its destination, or fails to
reach the destination and is discarded. In testing, it will tell you how long each hop from router to
router takes via the trip time of the packets it sends and receives from each successive host in
the route.