Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
107
IP Address Enter the IP address or the host name of the station you wish the Switch to
ping to.
Max Hop Enter the maximum number of hops. The range is from 2 to 255 and the
default is 30.
Result Displays the trace route results.
Click Test to initiate the trace route.
Maintenance
Maintenance functions are available from the maintenance bar located on the upper right corner
of the user interface. Maintenance functions include saving configuration settings, upgrading
firmware, resetting the configuration to factory default standards, rebooting the device, and
logging out of the interface. The following represents the Maintenance menu bar.
Configuration Manager
The File Management feature is used for saving your current configuration to a file on your
computer or a TFTP server, or to restore previously saved configuration settings to the Switch
using a configuration file from your local drive or TFTP server. Click the Backup icon enters into
the configuration manager function.
Click Apply to download configuration settings to your computer or a TFTP server, or to
upload previously saved configuration file to the system.