Owner's Manual

15
Current time
Displays the current system time.
Enable SNTP
Select whether to enable or disable system time
synchronization with an SNTP server.
Time Zone
Configure the time zone setting either by setting GMT
difference or by country.
Daylight Savings Time
Select from Disabled, Recurring or Non-recurring.
Daylight Savings Time Offset
Enter the time of Daylight Savings Time Offset.
Recurring From
Select the Day, Week, Month, and Hour from the list.
Recurring To
Select the Day, Week, Month, and Hour from the list.
SNTP/NTP Server Address
Enter the IP address or hostname of the SNTP/NTP server.
Server Port
Enter the server port of the SNTP/NTP server.
To configure date/time through SNTP:
1. Next to the Enable SNTP, select Enable.
2. In the Time Zone Offset list, select by country or by the GMT time zone in which the Switch
is located.
3. Next select Disabled or Recurring for Daylight Savings Time. Daylight saving is a period
from late spring to early fall when many countries set their clocks ahead of normal local
time by one hour to give more daytime light in the evening.
4. In the SNTP/NTP Server Address field, enter the IP address or the host name of the
SNTP/NTP server.
5. Finally, enter the port number on the SNTP server to which SNTP requests are sent. The
valid range is from 1–65535. The default is: 123.
6. Click Apply to update the system settings.
To configure date/time manually:
1. Next to the Enable SNTP, select Disable.
2. In the Manual Time field, use the drop-down boxes to manually select the date and time
you wish to set.