Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
5
IP Settings
This switch supports multiple IP interfaces can be configurable. There are 4 IPv4
address and 4 IPv6 link local address, and 16 global IPv6 address share with 4 IP
interfaces.
The IP Setting page contains fields for assigning IP addresses. IP addresses are either
defined as static or are retrieved using the Dynamic Host Configuration Protocol (DHCP).
DHCP assigns dynamic IP addresses to devices on a network. DHCP ensures that
network devices can have a different IP address every time the device connects to the
network.
To access the page, click
IP Settings under the System menu.
IPv4 Management
This page provides you to modify the management VLAN interface either set to static IP or
DHCP/BOOTP for auto-configuration.
Important--If the device fails to retrieve an IP address through DHCP, the default IP
address is 192.168.1.251 and the factory default subnet mask is 255.255.255.0.