Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
52
Status
Select to enable or disable IGMP Snooping on the Switch. The Switch
snoops all IGMP packets it receives to determine which segments
should receive packets directed to the group address when enabled.
The default setting is: Disabled.
Mode
IP mode: Group List will be changed to IP mode, and switch will learn
group by igmp join packet’s IP address, for example, 238.255.0.1 and
239.255.0.1 are different groups.
MAC mode: Group List will be changed to mac mode, and switch will
learn group by igmp join packet’s mac address, for example,
238.255.0.1 and 239.255.0.1 are the same group.
Report
Suppression
Select whether Report Suppression is Enabled or Disabled for IGMP
Snooping. The Report Suppression feature limits the amount of
membership reports the member sends to multicast capable routers.
Click Apply to update the system settings.
VLAN Settings
Use the IGMP Snooping VLAN Settings to configure IGMP Snooping settings for VLANs on the
system.
The Switch performs IGMP Snooping on VLANs that send IGMP packets. You can specify the
VLANs that IGMP Snooping should be performed on. Choose from the drop-down box whether to
enable or disable IGMP Snooping. Next, choose to enable or disable Fast Leave for the VLAN ID.