Owner's Manual

62
Port Displays the VLAN ID to which the PVID tag is assigned. Configure the PVID to
assign untagged or tagged frames received on the selected port.
PVID Enter the PVID value. The range is from 1 to 4094.
Accept Type Select Tagged Only and Untagged Only from the list.
Tagged Only: The port discards any untagged frames it receives. The port only
accepts tagged frames.
Untagged Only: Only untagged frames received on the port are accepted.
All: The port accepts both tagged and untagged frames.
Ingress
Filtering
Specify how you wish the port to handle tagged frames. Select Enabled or
Disabled from the list.
Enabled: Tagged frames are discarded if VID does not match the PVID of the
port.
Disabled: All frames are forwarded in accordance with the IEEE 802.1Q VLAN.
Note
:
To enable PVID functionality, the following requirements must be met:
•
All ports must have a defined PVID.
•
If no other value is specified, the default VLAN PVID is used.
•
If you wish to change the port's default PVID, you must first create a VLAN that
includes the port as a member.
Click Apply to update the system settings.