Owner's Manual

64
Voice VLAN
State
Select Enabled or Disabled for Voice VLAN on the Switch.
Voice VLAN ID Sets the Voice VLAN ID for the network. Only one Voice VLAN is
supported on the Switch.
VLAN priority
tag
Set the Voice VLAN COS value for the network
DSCP Set the DSCP value for the Voice VLAN
802.1p Remark Enable this function to have outgoing voice traffic to be marked with
the selected CoS value.
Remark
CoS/802.1p
Defines a service priority for traffic on the Voice VLAN. The priority of
any received VoIP packet is overwritten with the new priority when the
Voice VLAN feature is active on a port. (Range: 0 to 7; Default: 6)
Aging Time The aging time is used to remove a port from voice VLAN if the port is
an automatic VLAN member. When the last voice device stops sending
traffic
and the MAC address of this voice device is aged out, the voice VLAN
aging timer will be started. The port will be removed from the voice
VLAN after expiration of the voice VLAN aging timer. If the voice traffic
resumes during the aging time, the aging timer will be reset and stop.
The range for aging time is from 1 to 65535 minutes. The default is
1440 minutes.
Click Apply to update the system settings.