Owner's Manual

74
IPv6: ICMP: The Internet Control Message Protocol (ICMP) allows the gateway
or destination host to communicate with the source host.
OSPF: The Open Shortest Path First (OSPF) protocol is a link-state
hierarchical interior gateway protocol (IGP) for network routing Layer Two (2)
Tunneling Protocols. It is an extension to the PPP protocol that enables ISPs
to operate Virtual Private Networks (VPNs).
PIM: Matches the packet to Protocol Independent Multicast (PIM).
L2TP: Matches the packet to Internet Protocol (L2IP).
Source IP
Address Value
Enter the source IP address.
Source IP
Mask
Enter the mask of the new source IP address.
Destination IP
Address Value
Enter the destination IP address.
Destination IP
Mask
Enter the mask of the new source IP address.
Type of
Service
Select Any or DSCP
to match
from drop-down list. When DSCP to match is
selected, enter the DSCP. The range is from 0 to 63.
ICMP Type
Select Any, Protocol ID, or Select from List from drop-down menu.
Protocol ID: Enter the protocol in the ACE to which the packet is matched. The
range is from 0 to 255.
Select from List: Select the ICMP from the list in the provided field.
ICMP Code
Select Any or User Defined from drop-down menu. When User Defined is
selected, enter the ICMP code value. The range is from 0 to 255.
Click Apply to update the system settings.