Owner's Manual

76
ACL Name Select the ACL from the list.
Sequence Enter the sequence number which signifies the order of the
specified ACL relative to other ACLs assigned to the selected
interface. The valid range is from 1 to 2147483647, 1 being
processed first.
Action Select what action taken if a packet matches the criteria.
Permit: Forward packets that meet the ACL criteria.
Deny: Drops packets that meet the ACL criteria.
Protocol Select the Any, Protocol ID, or Select from List from drop-down
menu.
Protocol ID: Enter the protocol in the ACE to which the packet is
matched.
Select from List: Select the protocol from the list in the
provided field.
Source IP Address
Value
Enter the source IP address.
Source IP Prefix
Length
Enter the prefix length of the new source IP address. The range
is from 0 to 128.
Destination IP Address
Value
Enter the destination IP address.
Destination IP Prefix
Length
Enter the prefix length of the new source IP address. The range
is from 0 to 128.
Source Port Select Single or Range from the list. Enter the source port that
is matched to packets. The range is from 0 to 65535.
Destination Port Select Single or Range from the list. Enter the destination port
that is matched to packets. The range is from 0 to 65535.
TCP Flags Select whether to handle each six TCP control flags; URG
(Urgent), ACK (Acknowledgment), PSH (Push), RST (Reset), SYN
(Synchronize), and FIN (Fin) from drop-down menu.
Don't Care: The ACE do not treat the TCP control flag.
Set: The packet with the TCP control flag being set matches the
criteria.
Unset: The packet with the TCP control flag being unset
matches the criteria.
Type of Service Select
Any
or
DSCP to match
from drop down list. When DSCP to
match is selected, enter the DSCP. The range is from 0 to 63.
Click Apply to update the system settings.