Owner's Manual

8
VLAN
Specify the VLAN ID.
IP Address
This field allows the entry of an IPv4 address to be assigned to this IP
interface. Enter the IP address of your Switch in dotted decimal
notation.
Subnet Mask
A subnet mask separates the IP address into the network and host
addresses. A bitmask that determines the extent of the subnet that
the Switch is on. This should be labeled in the form: xxx.xxx.xxx.xxx,
where each xxx is a number (represented in decimals) between 0 and
255. The value should be 255.0.0.0 for a Class A network,
255.255.0.0 for a Class B network, and 255.255.255.0 for a Class C
network, but custom subnet masks are allowed. Enter the IP subnet
mask of your Switch in dotted decimal notation. The factory default
value is: 255.255.255.0.
Click the button to modify specific IPv4 interface.
Click the Apply button to accept the changes or the Cancel button to discard them.
IPv6 Network
In this page, you can add IPv6 address on un-management VLAN.