Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
81
Port Settings
From here, you can configure the QoS port settings for the Switch. Select a port you wish to set
and choose a CoS value from the dropdown box. Next, select to enable or disable the Trust setting
to let any CoS packet be marked at ingress.
Click Apply to update the system settings.
Port
Displays the ports for which the CoS
parameters are defined.
CoS Value
Select the CoS priority tag values, where 0 is
the lowest and 7 is the highest.
Trust
Select Enabled to trust any CoS packet
marking at ingress. Select Disabled to not trust
any CoS packet marking at ingress.