Owner's Manual
Table Of Contents
- Contents
- Ethernet Switch Features
- System
- L2 Feature
- VLAN
- Management
- ACL
- QoS
- Security
- Monitoring
- Diagnostics
- Maintenance
- Status
- Mode
- Report
- Suppression
93
HTTP Session
Timeout
Enter the amount of time that elapses before HTTP is timed out.
The default is 5 minutes. The range is from 0 to 10000 minutes.
HTTP Service Select HTTP service for the Switch is Enabled or Disabled. This is
enabled by default.
HTTPS Service Select the HTTP service is Enabled or Disabled. This is disabled by
default.
CLI Session Timeout Enter the amount of time that elapses before telnet/SSH is timed
out. The default is 5 minutes. The range is from 0 to 10000
minutes.
Telnet Service Select Telnet service for the Switch is Enabled or Disabled. This is
enabled by default.
SSH Service Select the SSH service is Enabled or Disabled. This is disabled by
default.
Click Apply to update the system settings.
Port Security
Network security can be increased by limiting access on a specific port to users with specific
MAC addresses. Port Security prevents unauthorized device to the Switch prior to stopping auto-
learning processing.