Owner's Manual

97
Index
Enter the entry number for event.
Data Source
Select the data source from the port.
Owner
Enter the switch that defined the event.
Click the Apply button to accept the changes or the Cancel button to discard them.
Event List
The Event List defines RMON events on the Switch.
Index Enter the entry number for event.
Event Type Select the event type.
Log: The event is a log entry.
SNMP Trap: The event is a trap.
Log & Trap: The event is both a log entry and a trap.
Community Enter the community to which the event belongs.
Description Displays the number of good broadcast packets received on the
interface.
Last Time Sent Displays the time that event occurred.
Owner Enter the switch that defined the event.
Click the Apply button to accept the changes or the Cancel button to discard them.
Event Log Table
From here, you can view specific event logs for the switch. Choose an event log you wish to view
from the drop-down list.
Alarm List
You can configure network alarms to occur when a network problem is detected. Choose your
preferences for the alarm from the drop-down boxes.