Quick Start Manual

11
Administration - System
From the System screen, you will be
able to change some of the Network
Storage Link’s general and IP settings.
These settings are as follows:
Identification
Server Name. In this field, you can
enter a new Server Name for the Net-
work Storage Link. Punctuation and
other special characters (e.g. * / | \ )
cannot be used.
Comment. This field can be used to
enter a comment, such as the Net-
work Storage Link’s location.
WorkGroup. This should match your
networked PC’s “Workgroup Name”.
Location
Language Support. Select the
appropriate language for users on
your network.
Time Zone. Select your local time
zone.
Local Date. Enter today’s date.
Local Time. Enter the present time.
The Network Storage Link will set its
own clock according to the date
and time you provide. This is not sent
to the Server until you click the Save
button.
WINS
Enable WINS. If your network has a
WINS Server, check this to register the
Network Storage Link with the WINS
Server. This will allow network users to
locate this device through a Router.
WINS Server. When enabling WINS,
enter your WINS Server’s IP Address in
Administration - System