English Deutsch Español Français Italiano Nederlands Português QUICK INSTALLATION GUIDE Powerline AV Network Adapter Model: PLE300 (EU)
PLE300 Table of Contents Table of Contents English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents PLE300 Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Resource Website Linksys Europe www.linksys.eu Linksys International www.linksys.com/international Linksys www.linksys.com Glossary www.linksys.com/glossary Network Security www.linksys.
PLE300 English : Overview English Overview Before you begin, you should have a powerline network already set up, with your router connected to a Powerline Adapter. The following instructions describe how to connect the Powerline AV Network Adapter (model number: PLE300) to a computer or other network device.
English : Installation B. PLE300 Connect the other end of the cable to the computer or other device that you want to add to the network. Connect Other End of Network Cable C. Connect the power cord to the Power port. D. Plug the other end into an electrical Connect Power Cord outlet. Plug Power into Outlet NOTE: Because the Adapter sends data over the power lines of your home, Linksys recommends that you plug the Adapter directly into an electrical outlet.
PLE300 English : Installation NOTE: If you want to configure advanced security for your powerline network, refer to the User Guide on the CD-ROM for more information.
Deutsch : Übersicht PLE300 Deutsch Übersicht Bevor Sie beginnen, vergewissern Sie sich, dass bereits ein Powerline Netzwerk eingerichtet und der Router an den Powerline Adapter angeschlossen ist. Die folgenden Anweisungen zeigen Ihnen, wie Sie den AV Powerline Netzwerkadapter (Modellnummer: PLE300) an einen Computer oder ein anderes Netzwerkgerät anschließen.
PLE300 B. Deutsch : Installation Schließen Sie das andere Kabelende an den Computer oder das Gerät an, das Sie zum Netzwerk hinzufügen möchten. Anderes Ende des Ethernet-Netzwerkkabels anschließen C. Schließen Sie das Netzkabel an den Stromanschluss an. D. Stecken Sie den Stecker am Kabel in Netzkabel anschließen eine Steckdose.
Deutsch : Installation PLE300 HINWEIS: Weitere Informationen zur Konfiguration der erweiterten Sicherheitseinstellungen für Ihr Powerline Netzwerk finden Sie im Benutzerhandbuch auf der CD-ROM.
PLE300 Español : Descripción general Español Descripción general Antes de empezar, es necesario disponer de una red PowerLine configurada, con el router conectado a un adaptador PowerLine. Las instrucciones siguientes le ayudarán en el proceso de conexión del adaptador de red PowerLine AV (modelo número PLE300) a un ordenador u otro dispositivo de red.
Español : Instalación B. PLE300 Conecte el otro extremo del cable al ordenador o dispositivo que desee agregar a la red. Conecte el otro extremo del cable de red. C. Conecte el cable de alimentación al puerto Power (Alimentación). Conecte el cable de alimentación. D. Enchufe el otro extremo en una toma de corriente. Conecte el enchufe a la toma de corriente.
PLE300 E. Español : Instalación Se encienden los indicativos luminosos de encendido, Ethernet y Powerline. NOTA: La luz PowerLine indica que se ha establecido la conexión entre el adaptador y la red PowerLine. Se encienden los indicativos luminosos de encendido, Ethernet y Powerline. La instalación del hardware ha finalizado. NOTA: Si desea configurar las opciones de seguridad avanzada para el adaptador Powerline, consulte la Guía del usuario en CD-ROM para obtener más información.
Français : Présentation PLE300 Français Présentation Avant de commencer, assurez-vous que vous disposez déjà d'un réseau Powerline configuré et que votre routeur est connecté à un adaptateur Powerline. Les instructions ci-après expliquent comment connecter l'adaptateur réseau AV Powerline (référence du modèle : PLE300) à un ordinateur ou à un autre périphérique réseau.
PLE300 B. Français : Installation Connectez l'autre extrémité du câble à l'ordinateur ou à un autre périphérique que vous souhaitez ajouter au réseau. Connexion de l'autre extrémité du câble réseau C. Branchez le cordon d'alimentation sur le port Power (Alimentation). Connexion du cordon d'alimentation D. Branchez ensuite l'autre extrémité sur une prise d'alimentation électrique.
Français : Installation E. PLE300 Les voyants d'alimentation, Ethernet et Powerline s'allument. REMARQUE : Le voyant indique Powerline que la connexion entre l'adaptateur et votre réseau Powerline est établie. Les voyants d'alimentation, Ethernet et Powerline s'allument L'installation matérielle est terminée. REMARQUE : Si vous souhaitez configurer une sécurité avancée pour votre réseau Powerline, reportez-vous au Guide de l'utilisateur présent sur le CD-ROM pour obtenir plus d'informations.
PLE300 Italiano : Informazioni generali Italiano Informazioni generali Prima di iniziare, è necessario che sia già impostata una rete Powerline, con il router collegato a un adattatore Powerline. Le istruzioni riportate di seguito descrivono come collegare l'adattatore di rete AV Powerline (numero modello: PLE300) a un computer o a un altro dispositivo di rete.
Italiano : Installazione B. PLE300 Collegare l'altra estremità del cavo al computer o a un altro dispositivo che si desidera aggiungere alla rete. Collegare l'altra estremità del cavo di rete C. Collegare il cavo di alimentazione alla porta di alimentazione. Collegare il cavo di alimentazione D. Inserire l'altra estremità del cavo in una presa elettrica.
PLE300 E. Italiano : Installazione I LED di alimentazione, Ethernet e Powerline si illuminano NOTA: il LED Powerline indica che il collegamento tra l'adattatore e la rete Powerline è stato stabilito. I LED di alimentazione, Ethernet e Powerline si illuminano L'installazione hardware è completata. NOTA: se si desidera configurare la protezione avanzata per la rete Powerline, consultare la Guida per l'utente contenuta sul CD-ROM per ulteriori informazioni.
Nederlands : Overzicht PLE300 Nederlands Overzicht Voordat u begint, moet er een Powerline-netwerk zijn geconfigureerd en moet de router in verbinding staan met een Powerline-adapter. In de volgende instructies wordt beschreven hoe u de Powerline AV-netwerkadapter (modelnummer: PLE300) kunt aansluiten op een computer of een ander netwerkapparaat.
PLE300 B. Nederlands : Installatie Sluit het andere uiteinde van de kabel aan op de computer of een ander apparaat dat u aan het netwerk wilt toevoegen. Het andere eind van de netwerkkabel aansluiten C. Sluit het netsnoer aan op de voedingspoort. Het netsnoer aansluiten D. Steek het andere uiteinde in een stopcontact.
Nederlands : Installatie E. PLE300 De LED’s Voeding, Ethernet en Powerline branden nu. OPMERKING: de LED geeft Powerline aan dat de verbinding tussen de adapter en uw Powerline-netwerk tot stand is gebracht. De LED's Voeding, Ethernet en Powerline branden De installatie van de hardware is voltooid. OPMERKING: raadpleeg de gebruikershandleiding op de cd-rom voor meer informatie als u geavanceerde beveiliging voor uw Powerlinenetwerk wilt configureren.
PLE300 Português : Descrição geral Português Descrição geral Antes de começar, já deverá ter uma rede Powerline configurada, com o router ligado a um Adaptador Powerline. As instruções seguintes descrevem como ligar o Adaptador de rede AV Powerline (número do modelo: PLE300) a um computador ou outro dispositivo de rede.
Português : Instalação B. PLE300 Ligue a outra extremidade do cabo ao computador ou outro dispositivo que pretenda adicionar à rede. Ligar a outra extremidade do cabo de rede C. Ligue o cabo de alimentação à porta de alimentação. Ligar o cabo de alimentação D. Ligue a outra extremidade a uma tomada eléctrica.
PLE300 E. Português : Instalação Os LEDs de alimentação, Ethernet e Powerline acendem-se. NOTA: O LED Powerline indica que a ligação entre o Adaptador e a rede Powerline foi estabelecida. Os LEDs de alimentação, Ethernet e Powerline acendem-se A instalação do hardware está concluída. NOTA: Se pretender configurar a segurança avançada para a rede Powerline, consulte o Manual do Utilizador no CD-ROM para obter mais informações.
Contacts PLE300 Location Belgique (Belgium) Web Address www.linksys.com/BE/support Česká republika (Czech Republic) www.linksys.com/CZ/support Danmark (Denmark) www.linksys.com/DK/support Deutschland (Germany) www.linksys.com/DE/support Die Schweiz (Switzerland) www.linksys.com/CH/support España (Spain) www.linksys.com/ES/support France www.linksys.com/FR/support Ireland www.linksys.com/IE/support Italia (Italy) www.linksys.com/IT/support Nederlands (Netherlands) www.linksys.
3240-00498