Quick Start Manual

QUICK INSTALLATION GUIDE

Powerline 4-Port

Network Adapter

Model: PLTS200

Package Contents

Powerline 4-Port Network Adapter•

Powerline Utility and User Guide •

on CD-ROM

Ethernet Network Cable •

Power Cord•

Quick Installation Guide•

Stand•

PAGE 1
QUICK INSTALLATION GUIDE Powerline 4-Port Network Adapter Model: Package Contents PLTS200 • Powerline 4-Port Network Adapter • Powerline Utility and User Guide on CD-ROM • Ethernet Network Cable • Power Cord • Quick Installation Guide • Stand
PAGE 2
Overview Before you begin, you should have a powerline network already set up, with your router connected to a Powerline Adapter. The following instructions describe how to connect the Powerline 4-Port Network Adapter (model number: PLTS200) to additional computers or other network devices.
PAGE 3
B. Connect the other end to the Ethernet port of your computer or other network device. Connect Other End of Network Cable NOTE: You can connect additional computers or other network devices to the remaining Ethernet ports of the Adapter. C. Connect the power cord to the Power port. Connect Power Cord D. Plug the other end into an electrical outlet.
PAGE 4
E. The Power, Ethernet, and Powerline LEDs light up. (The number of lit Ethernet LEDs depends on how many devices are connected.) NOTE: The Powerline LED indicates that the connection between the Adapter and your powerline network has been established. Power, Ethernet, and Powerline LEDs Light Up Hardware installation is complete. NOTE: If you want to configure advanced security for your powerline network, install the Powerline Utility from the included CD-ROM.