Instruction Manual

Table of Contents
Chapter 1: Introduction 1
The Instant EtherFast
®
Wireless-Ready USB PrintServer 1
Features 1
Package Contents 2
Chapter 2: Getting to Know the EtherFast
®
Wireless-Ready USB PrintServer 3
The Wireless-Ready USB PrintServer’s LEDs 3
The Wireless-Ready USB PrintServer’s Ports 4
Chapter 3: Hardware Installation 5
Overview 5
Finding the Wireless-Ready USB PrintServer’s Default Name 5
Connecting the Wireless-Ready USB PrintServer to Your Network 6
Chapter 4: Windows Driver Setup 7
Overview 7
The Autorun Bi-Admin Management Utility Installation 8
Installing the Wireless-Ready USB PrintServer’s Drivers 10
Chapter 5: Bi-Admin: PrintServer Management 16
Overview 16
Starting the Bi-Admin Management Utility 16
Using Bi-Admin 18
Setting the Wireless-Ready USB PrintServer’s IP Address 20
Changing the Device Name 21
Enabling and Disabling Protocols 21
Attaching Bi-Admin to a Remote Linksys PrintServer 22
Resetting the Wireless-Ready USB PrintServer 22
Restoring Factory Default 22
Chapter 6: Configuring the EtherFast
®
Wireless-Ready
USB PrintServer Using the Web-Based Utility 23
Accessing the Web-Based Utility 23
The Server Page 24
The Printer Page 24
The TCP/IP Page 25
The Wireless Page 26
The Status Page 27
Chapter 7: Advanced Properties 28
The AppleTalk Page 28
The Internet Printing Page 29
The Logical Printers Page 30
The NetBEUI Page 31
The SNMP Page 32
Chapter 8: Internet Printing Protocol (IPP) 34
Windows IPP Client Setup 34
Chapter 9: DHCP Support for the EtherFast
®
Wireless-Ready USB PrintServer 40
Appendix A: Troubleshooting 41
Hardware Issues 41
General Printing Issues 41
Appendix B: About Bi-Directional Printing 42
Appendix C: About the Wireless-Ready USB
PrintServer Software 43
Appendix D: Glossary 44
Appendix E: Specifications 52
Appendix F: Environmental 53
Appendix G: Warranty Information 54
Appendix H: Contact Information 55
Instant EtherFast
®
Series
EtherFast
®
Wireless-Ready USB PrintServer