Package Contents • • • • • • • • • 2300 Series Camera Stand Kit Power Supply (12V 1A) 6’ Ethernet Cable Lens Adapter Ring Allen Wrench Quick Installation Guide Setup CD Antenna (WVC2300) Business Internet Video Camera with Audio Model: PVC2300, WVC2300 QUICK INSTALLATION BUSINESS SERIES
Table of Contents Minimum Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adjusting the Lens. . . . . . . . . . . .
Minimum Requirements Minimum System Requirements (for 1 camera): CPU Pentium 4 class, 2GHz Memory 1GB Operating System Microsoft Windows 2000, XP or Vista Hard Drive 30MB of available space Graphics Card AGP with a minimum 64MB Browser Internet Explorer 6.0 (or above), Mozilla† Firefox, and Netscape7.0 (or above) †Mozilla users must download ActiveX plug-in at http://www.iol.ie/~locka/mozilla/mozilla.
1� Installation NOTE: Before attaching the camera extension or swivel head, the stand base can be mounted in a permanent location by using three screws to secure the stand base to the desired location. A. The Camera stand can be connected two different ways: Camera Extension Locknut Attach the stand base to the camera extension and attach the camera extension to the swivel head. You can connect the swivel head directly to the stand base if the extension isn’t necessary.
Installation C. D. Connect the included Ethernet network cable to your network router or switch. Connect the other end of the cable to the Camera’s Ethernet port. If your network switch provides Power over Ethernet to the Camera, verify the Camera’s LEDs are lit and skip steps E-G. E. Connect the included power adapter to the Camera’s Power port and plug the other end into a standard electrical outlet. Verify that the Camera’s LEDs are lit.
Installation NOTE: Steps F and G on this page are only necessary if you are using the WVC2300 Wireless-G Business Internet Video Camera. F. Connect the antennas to the antenna connectors on the Camera. G. Place the antennas in an upright position.
2� Configuration A. B. C. Insert the Setup CD into your CD‑ROM drive. If the CD doesn’t run automatically, go to My Computer and click on your CD-ROM drive. The Setup screen will appear. Click the Click Here to Start button. The license agreement screen will appear, click Next if you agree and wish to proceed.
Installation D. The Wizard will now search for your camera. Once found highlight the camera and click Next. If the Camera you want is not displayed in the Selection box, click Search Again. NOTE: The Camera defaults to DHCP mode. If your network doesn’t have a DHCP server or if you are having issues obtaining an IP address, you can assign a static IP address to the Camera by pressing the reset button for less than 3 seconds. A static IP address of 192.168.1.99 will be assigned to the Camera.
Installation E. The default username and password is admin. Type admin in lowercase letters, in the Administrator Name and Administrator Password fields, then click OK. For security purposes, it is recommended that you change the default name and password using the Camera’s web-based utility at a later time. F. On the Basic Settings screen, change the following settings: Camera Name: Enter a unique name for the Camera, up to 15 characters in length.
Installation G. H. I. If you know your IP address, then select Static IP address, otherwise leave the default setting, Automatic Configuration DHCP. The New Internet Camera Settings screen will appear and display the Camera’s settings. Click Next to continue or click Back to make changes. A confirmation window will appear, click OK to confirm the settings. A timer will appear as the settings are saved to the Camera. J. A window will appear indicating that the settings have been saved successfully.
Installation K. L. The Wizard will now return to the Welcome screen. Click Exit to automatically launch your default web browser and proceed to the Home page login screen. The login prompt will appear, enter admin in both the User name and Password fields. M. Internet Explorer will prompt you to install ActiveX. In order to view video you must accept the ActiveX download. Click Install ActiveX Control.
Installation N. Click the Install button. Installation is complete! You should be able to view video on the home page.
3� Adjusting the Lens The Linksys Business Internet Video Camera uses an adjustable CS mount lens. Camera Lens Focus Used to adjust camera focus. Camera Base Does not move Adjust the focus by slowly rotating the Camera Lens Focus clockwise or counterclockwise. NOTE: The resolution and video quality can be adjusted from the Audio/Video > Video screen in the web-based utility. Use the Camera Lens Focus to fine tune the image.
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM. Additional support is also available via e-mail or by phone. 24-Hour Technical Support 800-326-7114 RMA (Return Merchandise Authorization) http://www.linksys.com/support E-mail Support support@linksys.com FTP Site ftp://ftp.linksys.com Website http://www.linksys.com http://support.linksys.com Sales Information 800-546-5797 (800-LINKSYS) www.linksys.
