User Guide AC1200 Max Wi-Fi Range Extender Model # RE6500
Table of Contents Product Overview .........................................................................................................3 RE6500 ............................................................................................................................................................. 3 How to Install the Range Extender .........................................................................6 Special Feature—Music Streaming .............................................................
Product Overview RE6500 Front view Indicator LED—The light on the top of the range extender gives you information about power, updating, Wi-Fi Protected Setup and signal strength. Note: Your antennas might look different from those pictured here. Power Light Blinking white Status/ description • Booting up. • Resetting to factory defaults. • Upgrading firmware. Solid white • Ready to use. Blinking orange • Ready for setup. • Disconnected from router. • Weak connection to router.
Back view Audio Jack (1)—Connect the extender to your speakers. Ethernet (2) — Connect wired devices to your wireless network with Ethernet (network) cables. The green lights turn on when an Ethernet device is connected and active on these ports. The lights blink when the extender is sending or receiving data over the Ethernet ports. Wi-Fi Protected Setup™ Button (3)—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network.
Bottom view Reset Button—Press and hold until the power light on the top of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory Defaults screen in the extender’s settings interface (page 16).
How to Install the Range Extender Before starting setup, make sure your router has a working Internet connection. Does your router have a WPS button? Wi-Fi Protected Setup (WPS) is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support WPS have a button that might be labeled with this symbol: If yes, continue with Wi-Fi Protected Setup below If no (or not sure), continue with browser-based setup, also in this user guide.
If it turns solid white, the connection was successful. Move to step 5. If it starts to blink orange , the connection failed. You may try again by repeating step 4 or try browser-based setup, also in this document. 5. Extend your 5 GHz network. You may skip this step if your router does not have a 5 GHz network or if you don't want to extend that network. a. Press the WPS button on your router again. Within the next two minutes complete step 5b. b. Press the WPS button on your range extender again.
Your range extender is now set up. Enjoy your extended Wi-Fi coverage. Accessing your range extender settings after WPS Your range extender's default admin password is "admin". It is highly recommended that you change this after WPS setup. To change or view range extender settings, first connect to an extended network. In a browser, go to http://extender.linksys.com and enter your admin password. Browser-Based Setup 1.
2. Wait for a blinking orange light It could take up to a minute for the light on the top of the range extender to change from blinking white to blinking orange. 2. If the light doesn’t change color, or if it is solid orange, reset to factory defaults. (See Using Range Extender Settings on page 16..) 3. Connect to the range extender On a computer, phone or tablet, connect to the Wi-Fi network Linksys Extender Setup - XXX.
4. Launch setup Enter http://extender.linksys.com in a browser to complete setup. Follow the on-screen instructions to select your network to extend, customize your extended network name and password, and find the best spot using Spot Finder Technology. Tips • The range extender is set to Auto Update by default. Auto Update allows the range extender to download and install updates overnight.
Special Feature-----Music Streaming Stream music through your AC1200 range extender to connected speakers iOS • Connect iOS device to the same Wi-Fi network as your range extender. • Swipe up from the bottom of your screen. • Tap on Linksys Range Extender.
Android* • Connect Galaxy device to the same Wi-Fi network as your range extender. • Select Music app • Choose music file and tap Screen Mirroring icon • Choose Linksys Range Extender. * For other Android devices, stream music with MediaHouse, UPnPlay, ArkMC, BubbleUPnP, Pixel Media, and 2Player 2.0. Your screen might look different depending on your device model and version of Android.
Windows • Open Windows Media Player • Right-click on a music file and choose Linksys Range Extender Mac OS X • Open iTunes • Choose speakers • Select Multiple to stream audio simultaneously to more than one range extender.
This list of supported media players is subject to change with the release of new software or mobile apps. • Windows users can stream music with Windows Media Player12. • Mac users can stream music with proprietary software or the SofaPlay app.. • Android users can stream music with MediaHouse, UPnPlay, ArkMC, BubbleUPnP, Pixel Media, and 2Player 2.0.
How to Access the Settings Interface After setup use the extender’s settings interface to change any settings. If you named your range extender during setup, you can access the settings interface by entering the name in a browser. Example—If you named your extender MyExtender, enter http://MyExtender (Windows) or http://MyExtender.local (Mac). Your range extender’s default name is http://RE6500-XXX (Windows) or http://RE6500-XXX.local (Mac OS X or iOS).
Using Range Extender Settings Click Help on the right side of the screen for additional information on the screen’s options. Changes to settings will not be effective until you click Save at the bottom of the screen. You also can click Cancel to clear any changes.
Using Wi-Fi Protected Setup™ Wi-Fi Protected Setup makes it easy to connect your extender to your network, and connect other devices to your network through the range extender. Wi-Fi Protected Setup light activity WPS Light Description Blinking slowly WPS connection in progress. (up to two minutes) Solid WPS connection was (10 seconds) successful. Connecting devices to your network through the range extender Repeat the instructions for each client device that supports Wi-Fi Protected Setup. 1.
2. Connecting with the client device’s PIN a) Enter the PIN from the client device in the field on the extender’s Wi-Fi Protected Setup screen. b) Click Register on the extender’s Wi-Fi Protected Setup screen. When the connection is complete, the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds. c) Click OK on the extender’s Wi-Fi Protected Setup screen within two minutes or you will have to start over. 3.
How to Use Site Survey Site Survey gives a snapshot of all access points and wireless routers within range of the extender. Log in to the settings interface (see “How to Access the Settings Interface” on page 15). Click the Wireless tab. Click the Site Survey page. • Select—Click the button next to the wireless network name (SSID) in the Select column, and click Connect. For dual-band networks, be sure to connect to both bands, 2.4 GHz and 5 GHz. • SSID—The names of neighboring wireless networks.
Troubleshooting Your RE6500 works on 2.4GHz and 5 GHz networks. You cannot get your range extender connected Check the position of your router and extender. • For first-time setup, you may need to place the extender closer to the router. After you’ve set up your extender, you can unplug it and move it to the final location. • To reduce signal obstructions, try alternate locations for the router and extender. • Try repositioning the antennas on the range extender.
2. Click View Available Wireless Networks. A list of available networks will appear. 3. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. Your wireless network name, BronzeEagle in this example, is shown selected. 4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields. Click Connect.
Note—Depending on your version of Windows, there could be some differences in wording or icons in these steps. To fix the problem on Mac computers, do the following: 1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. Linksys Smart Wi-Fi has automatically assigned your network a name. 2. In the example below, the computer was connected to another wireless network named JimsRouter.
Specifications RE6500 Model Name Description Model Number Standards Linksys RE6500 Dual-band Wireless-AC Range Extender RE6500 IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.
Visit linksys.com/support/RE6500 for award-winning 24/7 technical support BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/enus/gplcodecenter for questions or GPL source code requests.
Especificações RE6500 Nome do modelo Descrição Número de modelo Padrões Linksys RE6500 Extensor de alcance sem fio AC de banda dupla RE6500 IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.
Quick Start Guide
Stream music You can connect speakers to your range extender and stream music from mobile devices and computers. iOS devices • Connect iOS device to the same Wi-Fi network as your range extender. • Swipe up from the bottom of your screen. • Tap on Linksys Range Extender. Android devices• For Samsung Galaxy • Connect Galaxy device to the same Wi-Fi network as your range extender. • Select Music app. • Choose music file and tap Screen Mirroring icon. • Choose Linksys Range Extender.
Windows MacOSX • Open Windows Media Player • Right-dick on music file and choose Linksys Range Extender. 6 Mo. 1,t,wli Md 1101111.. 1 ""'' ... lo k Uk• _ . , Moff (Fnim T • 9 10 u Btw,W-~ s..y No Go (New~ Th«lo'lh.tng~ E,-~(TM- v...r e.i.,,Pholo,.,,.......; s--~o H,ldO-,,~ -~n ~ ...., .. ,..,_ • Open iTunes • Choose speakers • Select Multiple to stream audio simultaneously to more than one range extender. Ploy 1.
1 Connect antennas Antennas should be upright for best results. Note: Your antennas m,ght look different from those shown. 3 Wait for a solid light It could take up to two minutes for the light on the cover of the range extender to stop blinking. Indicator LED 2 Plug in t he range extender Plug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of your router's Wi-Fi signal at that location.
5 Launch setup Enter http://extender.linksys.com in a browser and follow the on-screen instructions. IE) .' "·-Welcom• to Seu.1p g I ,,._ - 2.4 GHz network name § I i ,_. 0 l [ l 2.4 GHz network password 1 II ro a.n,, I-- - •11n• Write down your extended network names and passwords. [ http:1/extender.linksys.com I• .
Frequently Asked Questions Why can I not see "Linksys Extender Setup" in my Wi-Fi list? Make sure the LED on the range extender cover is solid. If you still can't see the setup network, move the device being used for setup closer to the range extender. Wait for a solid LED and refresh the Wi-Fi list. Why do I not see the setup screen on http://extender.linksys.com? On your device's Wi-Fi manager, make sure "Linksys Extender Setup" is selected, then refresh your browser.
LIN
WIRELESS REGULATORY INFORMATION FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
Prescriptions supplementaires pour la bande 5600-5650 MHz Jusqu'a nouvel ordre, les appareils faisant l'objet de la presente section ne doivent pas transmettre dans la bande 5600-5650 MHz, afin que les radars meteorologiques d'Environnement Canada fonctionnant dans cette bande soient proteges. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications.
Safety Notices English & WARNING: & WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. ~ WARNING:This product may contain chemicals, known to the State of California to cause cancer, and birth defects or other reproductive harm. l.lJ & WARNING: Wash hands after handling. The power adaptor is the equipment's disconnection device.
Mexico Regulatory Statement La operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.
Latviski [Latvian!: Si iekarta atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. Lietuvi4 [Lithuanian]: Sis Irenginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas sios direktyvos nuostatas. Nederlands[Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.
Wire Iess Equipment (Wireless-AC/N/G/A/8 Products) The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC: • Radio: EN 300 328 and/or EN 301 893 as applicable • EMC: EN 301489-1, EN 301489-17 • Safety: EN 60950-1 and either EN 50385 or EN 50371 For the Linksys Wireless-AC, -N, -G, -B, and/or -A products, the following CE mark and class 2 identifier are added to the equipment.
Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz)' Max Power Level (EIRP) (mW) 2400-2483,5 100 5150-5250' 200 5470-5725 1000 Indoor ONLY Indoor & Outdoor X X X toual band versions which can also operate in the 5 GHz band are limited to only operate within the band 5150-5250 MHz and as such are restricted to indoor use only (except Denmark).
Technical Documents on www.linksys.com Follow these steps to access technical documents: 1. 2. 3. 4. 5. 6. 7. Enter www.linksys.com in your web browser. Select the country or region in which you live. Click the Support tab. Type the model number or keyword. Select Downloads from the list of tabs. Select the version of product. Click on the document you want and it will open in PDF format if you have Adobe Reader installed on your computer.
WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys home networking products.
Lietuvskai (Lithuanian)-Aplinkosaugos informacija, skirta Europos Sajungos vartotojams Europos direktyva 2002/96/EC numato, kad jrangos, kuri ir : kurios pakuote yra pazymeta siuo simboliu Qveskite simboli), negalima salinti kartu su nerusiuotomis komunalinemis atliekomis. Sis simbolis rodo, kad gamini reikia salinti atskirai nuo bendro buitini4 atliek4 srauto.
Visit linksys.com/support for award-winning 2 4/7 technical support Belkin, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. 8820-01827 Rev.
