8-PORT GIGABIT SWITCH USER GUIDE Model# SE4008
Contents Product Overview SE4008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Overview SE4008 LEDS The system LED is solid when the switch is powered on. Ethernet 1 thru 8 (Primary) Numbered LEDs correspond to the numbered ports on the switch’s back panel. If the LED is solid, a device is connected to that port. A flashing LED indicates network activity over that port. Ethernet 1 thru 8 (Secondary) If the LED is not on, a device is connected to that port at 10/100 Mbps.
Setting Up: Basics INSTALL YOUR SWITCH 1. Connect the power adapter to your switch and an electrical outlet. Toggle the power switch to the | (On) position (Europe only). 3. Connect your wired devices to the switch with Ethernet cables. You may use any of the remaining seven Ethernet ports. Get help Internet: linksys.com/support or Twitter: @LinksysCares 2. Connect your router to any port on the switch with an Ethernet cable.
Specifications Linksys SE4008 Model Name Linksys SE4008 Description WRT 8-Port Gigabit Switch Standards IEEE802.3, 802.3u, 802.3x, 802.3ab, 802.
Visit linksys.com/support for award-winning technical support BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. LNKPG-00160 Rev.
