Network Device Specifications

Linksys
SPA-1001
Telephony Features
• One voice port (RJ-11) for analog phones or fax machines
• Imedance agnostics – 8 Configurable settings
• Call Waiting, cancel call waiting, call waiting Caller ID
• Caller ID with Name/number (multi-national variants)
• Caller ID blocking
• Call forwarding:no answer,busy, all
• Do not disturb
• Call transfer
• Message waiting indication – visual and tone based
• Call return
• Call back on busy
• Call blocking with tol restriction
• Delayed disconnect
• distinctive Ringing – Calling and called number
• Off-hook warning tone
• Selective/Anonymous call rejection
• Hot line and warm line calling
• Speed dialling of 8 numbers/addresses
• Music on hold
Package contents
• SPA-1001 phone adapter unit
• Power adapter
• RJ-45 Ethernet cable
• Quick installation guide
Specifications
Data networking
• MAC address (IEEE 802.3)
• Ipv4 – Internet protocol v 4 (RFC 791) upgradeable to v6 (RFC
1883)
• ARP – address resolution protocol
• DNS – A record (RFC 1706), SRV record (RFC 2782)
• DHCP Client – Dynamic host configuration Protocol (RFC 2131)
• ICMP - Internet control message protocol (RFC792)
• TCP – Transmission control protocol (RFC
• UDP – User Data Protocol (RFC768)
• RTP - Real time protocol (RFC 1889) (RFC 1890)
• RTCP – Real time control Protocol (RFC 1889)
• DiffServ (RFC 2475), type of service – TOS (RFC 791/1349)
• SNTP – Simple network time protocol (RFC 2030)
Voice gateway
• SIPv2: Session initiation protocol v2 (RFC 3261, 3262, 3263,
3264), sip proxy redundancy – dynamic via DNS SRV, A records,
re-registration with primary SIP proxy server
• SIP support in network address translation networks – NAT (incl.
STUN)
• Secure (encrypted) calling via pre-standard implementation of
secure RTP
• Codec name assignment
Voice algiotherms
• G.711 (A-law and u-law)
• G.726 (16/24/32/40 kbps)
• G.729 A
• G.723.1 (63 kbps, 5.3 kbps)
• Dynamic Payload
• Adjustable audio frames per packet
Call Capability
• Fax tone detection pass-through -using G.711
• DTMF:In band and out of band (RFC 2833) (SIP Info)
• Flexible dial plan support with inter digit times and Ip dialling
• Call progress tone generation]
• Jitter buffer – adaptive
• Frame loss concealment
• Full duplex audio
• Echo cancellation (G.165/G.168)
• VAD – Voice activity detection with silence suppression
• Attenuation / Gain adjustments
• Flash hook timer
• MWI – Message waiting indicator tones
• VMWI – via FSK
• Polarity Control
• Hook flash event signalling
• Caller ID generation (Name and number) – Bellcore, DTMF, ETSI
• Music on hold client
• Streaming audio server – up to 10 sessions
Security
• Password protected system reset to factory default
• Password protected admin and user access authority
• Provision/configuration/authentication:
• HTTPS with factory installed client certificate
• HTTP digest – Encrypted authentication via MD5 (RFC 1321)
• Up to 256-bit AES Encryption
Provisioning, administration and maintenance
• Web browser administration and configuration via integral web
server
• Telephone key pad configuration with interactive voice prompts
• Automated provisioning and upgrade via HTTPS, HTTP, TFTP
• Asynchronous notification of upgrade availability via NOTIFY
• Non-intrusive, in-service upgrades
• Report generation and event logging
• Syslog and debug server recorded – per line configurable
Physical interface
• 1 10baseT RJ-45 Ethernet port (IEEE 802.3)
• 1 RJ-11 FXS Phone port– for analog circuit telephone device
(tip/ring)
Interface circuit (SLIC)
• Ring voltage:40-55 VRMS configurable
• Ring frequency: 10 Hz – 40Hz
• Ring waveform: Trapezoidal andsinusoidal
• maximum ringer load: 3 REN
• On-hook/off hook characteristics:
• On-hook voltage (tip/ring):-50 V NOMINAL
• Off-hook current: 25 mA min
• Terminating imedance: 8 configurable settings including North
America 600 ohms, European CTR21
Regulatory Compliance
FCC (part 15, class B), cUL, CE, IC-003, A-tick
Power supply
• DC input voltage:+VDC at 2.0 A Max
• Power consumption: 5 watts
• Switching type (100-240v) Automatic
• Power adapter: 100-240v – 50-60Hz (26-34VA) AC input, 1.8m
cord
Indicator lights/LED
LAN Activity/Link LED- Green
Status LED (In-Use, Provisioning, Idle, Alert) - Amber
Documentation
• Quick-Start installation and configuration guide
• User guide
Dimensions
• 94mm x 63mm x 28mm
Unit weight
• 76.5g/ 2.7oz
Operating temp
• 32º to 113ºF (0º to 45ºC)
Storage Temp.
• -77º to 158ºF (-25º to 45ºC)
Operating humidity
• 10 to 90% non condensing
Storage humidity
• 10 to 90% non condensing000