Package Contents • • • • • 8-Port Telephony Gateway RJ-45 Ethernet Cable Power Supply Power Cord Quick Installation 8-Port Telephony Gateway Model: SPA8000 QUICK INSTALLATION
Table of Contents Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Interactive Voice Response Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Regulatory Information. . . . . . . . . . . . . .
1� Connect Before You Begin Make sure you have the following: • • • • An active Network connection Active Internet phone service accounts and settings (if connecting to Internet phone service) A cable/DSL modem (if connecting to Internet) One computer for configuration of the Gateway or an analog telephone with an RJ-11 phone cable NOTE: If the Gateway is pre-configured by your ITSP, then you do not need to change any of the default voice settings.
E. F. G. H. I. Connect one end of an Ethernet network cable (included) to the ETHERNET port of the Gateway. Connect the other end to your cable/DSL modem. Ethernet Connection Connect one end of a different Ethernet network cable to the AUX port of the Gateway. Connect the other end to the Ethernet port of your PC. Power on the cable/DSL modem. Connect the included power adapter to the Gateway’s power port, and then plug the power adapter into an electrical outlet.
2� Configuration A. B. C. D. E. Launch the web browser on the PC. Enter http://192.168.0.1/ advanced in the Address field (192.168.0.1 is the default local IP address of the Gateway). Then press Enter. If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. Proceed to step D. If your ITSP supplied a password, you will see a login screen. In the User Name field, enter user, which is the default user name for user access (this cannot be changed).
Service setting. Then enter the PC’s MAC address in the Cloned MAC Address field. 3. Click Submit All Changes. Static IP 1. Select Static IP for the Connection Type. 2. In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field 3. In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. 4. Click Submit All Changes.
3� Interactive Voice Response Menu This section explains how to use the Interactive Voice Response Menu to configure the Gateway’s network settings. You will use the telephone’s keypad to enter your commands and select choices, and the Gateway will use voice responses. To access the Interactive Voice Response Menu: A. B. C. Use a telephone connected to the PHONE port of the Gateway. (You can only access the Interactive Voice Response Menu through an analog telephone, not any of the Internet phones.
Interactive Voice Response Menu Action Command Enter Interactive Voice Response Menu **** Check Internet Connection Type 100 Set Internet Connection Type 101 Choices Description Use this command to enter the Interactive Voice Response Menu. Do not press any other keys until you hear, “Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit.” DHCP - 0 . Check static or dynamic IP . Select the type of Internet connection you are using.
Interactive Voice Response Menu Action Command Choices Description Set Gateway IP Address 131 First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the gateway IP address. Use the * (star) key when entering a decimal point. Check MAC Address 140 Hear the MAC address of the Gateway in hexadecimal string format. Check Firmware Version 150 Hear the version number of the firmware running on the Gateway.
Interactive Voice Response Menu Action Command Enable/Disable WAN Access to the Web-based Utility 7932 Manual Reboot 732668 (R-E-B-O-O-T) Factory Reset 73738 (R-E-S-E-T) User Factory Reset Choices Enable - Press 1. Disable - Press 0. 877778 Description Use this setting to enable or disable WAN access to the Webbased Utility. (This Utility lets you configure the Gateway.) After you hear, “Option successful,” hang up the phone. The Gateway will automatically reboot. Confirm - Press 1.
4� Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.
If this equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment.
Safety Notices • Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. • Do not use this product near water, for example, in a wet basement or near a swimming pool. • Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Industry Canada Statement This device complies with Industry Canada ICES-003 rule. Operation is subject to the following two conditions: 1 .
5� WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Dansk (Danish) - Miljøinformation for kunder i EU EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder.
ξλληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Η Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισμός ο οποίος φέρει αυτό το σύμβολο στο προϊόν και/ή στη συσκευασία του δεν πρέπει να απορρίπτεται μαζί με τα μικτά κοινοτικά απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά απορρίμματα.
iegādājāties šo izstrādājumu. Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto.
Norsk (Norwegian) - Miljøinformasjon for kunder i EU EU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for husholdningsavfall. Det er ditt ansvar å kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer.
Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej únii Podľa európskej smernice 2002/96/ES zariadenie s týmto symbolom na produkte a/alebo jeho balení nesmie byť likvidované spolu s netriedeným komunálnym odpadom. Symbol znamená, že produkt by sa mal likvidovať oddelene od bežného odpadu z domácností.
6� Warranty Warranty Your Internet telephone service provider warrants to You that, for a period of one year (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Your Internet telephone service provider’s entire liability under this warranty will be for Your Internet telephone service provider at its option to repair or replace the Product or refund Your purchase price less any rebates.
Contact Information For additional information or troubleshooting help, contact your Service Provider. Website Inside the United States: www.linksys.com Outside the United States: www.linksys.com/international Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
www.linksys.
