Quick Start Manual

Model No.

Quick Installation Guide

A Division of Cisco Systems, Inc.

WIRED

USB1000 (EU/UK/LA)

Gigabit USB Adapter

Package Contents

• One USB1000 - Gigabit USB Adapter

• Setup Wizard CD-ROM with User Guide

in PDF format

•Network Cable

PAGE 1
® A Division of Cisco Systems, Inc. Package Contents • One USB1000 - Gigabit USB Adapter • Setup Wizard CD-ROM with User Guide in PDF format • Network Cable Gigabit USB Adapter WIRED Model No.
PAGE 2
1 Install the Driver IMPORTANT:Make sure to run the Setup Utility before installing the Adapter A B Insert the Setup Utility CD into your PC's CD-ROM drive. The Setup Utility's Welcome screen should appear on your monitor. If it does not, this means the Setup Utility is not automatically running as it should. Start the Setup Utility manually by clicking the Start button, selecting Run, and typing d:\setup.exe (where "D" is your PC's CD-ROM drive). B Click the Install button.
PAGE 3
A To install the driver in a different folder, click Browse and select a folder location. Then, click Next. D2 B The driver files will be copied onto your PC. E C D This screen will appear when the installation is complete. Click Finish. Click the Exit tab to exit the Utility. F Continue to Step 2 to install the Adapter.
PAGE 4
2 Install the Hardware Hardware Installation A Connect the USB Connector of the Gigabit USB Adapter to the USB port of your computer. To do this, slide the connector out from it’s holder, unwind the cable, and connect the USB Connector to the USB port in your PC. A The Adapter will be automatically detected and installed by Windows. Your Windows operating system may require you to restart your computer to complete the installation.