Owner's Manual

ManualsBrandsLinksys ManualsWirelessLinksys USB2HUB4

ProConnect

Series

USB 4-Port Hub

USB 2.0

Use this guide to install: USB2HUB4

User Guide

Summary of content (10 pages)

PAGE 1
ProConnect® Series USB 4-Port Hub USB 2.
PAGE 2
COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. ProConnect is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every ProConnect® USB 4-Port Hub USB 2.
PAGE 3
ProConnect® Series Table of Contents USB 4-Port Hub USB 2.0 Chapter 1: Introduction Chapter 1: Introduction The USB 4-Port Hub USB 2.0 Features Package Contents System Requirements 1 1 1 2 2 Connect up to four USB 2.0 or 1.1 devices to a single USB port! When the USB 4-Port Hub connects USB 2.0 devices to a USB 2.0 port, you get data rates up to 480Mbps—perfect for graphics, multimedia, or gaming applications. Chapter 2: About USB Overview USB 2.
PAGE 4
ProConnect® Series USB 4-Port Hub USB 2.0 Chapter 2: About USB Package Contents Overview USB, which is short for Universal Serial Bus, is a technology designed to make connecting devices to computers easier. First developed in 1996 by a group of computer industry leaders that included Compaq, Digital, IBM, Intel, Microsoft, NEC, and Northern Telecom, USB is one of the most widely used technologies for users who want to add peripherals to their computers.
PAGE 5
ProConnect® Series USB Cabling The USB 4-Port Hub comes with one USB cable. One end of the USB cable has a rectangular connector called a Type A connector. The other end of the cable has a square Type B connector. The USB cable’s Type B end connects to the USB device (in this case, the USB 4-Port Hub). The Type A end connects to a computer’s USB port. USB Type A USB 4-Port Hub USB 2.
PAGE 6
ProConnect® Series The USB 4-Port Hub’s LEDs USB 4-Port Hub USB 2.0 Chapter 4: Installing the USB 4-Port Hub 1. Plug the power adapter into the electrical outlet. 2. Plug the power adapter into the power port of the USB 4-Port Hub. Figure 3-2 Power Amber. The Power LED lights up when the Hub is powered on and connected to the PC. 1-4 Green. Each of these LEDs are port-specific. When a peripheral is connected to a specific port and there is activity, the associated LED will light up. Figure 4-1 3.
PAGE 7
ProConnect® Series 4. Plug the other end of the USB cable into the PC’s USB port. The computer’s operating system will install the appropriate driver automatically. You may be asked to supply your original Windows CD installation files, which include all necessary drivers and files. Linksys does not provide any drivers. 5. Using additional USB cables, plug your USB peripherals into the Hub. USB 4-Port Hub USB 2.
PAGE 8
ProConnect® Series USB 4-Port Hub USB 2.0 Appendix B: Glossary Appendix C: Specifications Hot Swap - The ability to replace a card or other hardware part in a hardware device without turning it off or losing functionality. Standards: OHCI, UHIC, USB 1.1 and 2.0 Ports: One USB Type B Root Port Four USB Type A Device Ports Speeds (Mbps): 480 (High Speed) 12 (Full Speed) 1.
PAGE 9
ProConnect® Series USB 4-Port Hub USB 2.0 Appendix D: Warranty Information Appendix E: Contact Information BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT’S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.