z User Guide Velop WHW01/VLP01 1
Table of Contents Product Overview___________________________________________________________________________________________ 3 Front/top ______________________________________________________________________________________________________3 Back ____________________________________________________________________________________________________________4 Bottom _________________________________________________________________________________________________________5 Where to find more help _________________
Product Overview Front/top The light on the top of your node gives you information about the node’s operation.
Back Ethernet ports----- Connect to other wired devices on your network with ethernet cables. One node in your Velop system must be connected to your modem or modem router. Nodes know whether they are connected to a modem or a client device. Note—For best performance, use a CAT5e or higher rated cable on the ethernet port. Power port—Connect the included AC power adapter to this port.
Bottom Reset button-----Press and hold until the light on top of the node turns red, fades and flashes bright red again to reset the node to its factory defaults. Power switch-----Press | (on) to power on the node.
Help Where to find more help • Linksys.com/support/Velop • Linksys app help (launch the app and click Help in the main navigation menu) Note—Licenses and notices for third party software used in this product may be viewed on http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/enus/gplcodecenter for questions or GPL source code requests.
Set Up Download the Linksys app. You need this app to set up Velop. Go to the app store for your device and search for Linksys. Install the app, open it and follow the instructions. Note— Before downloading, make sure the app works with your version of Apple iOS or Android OS. During setup you will create a Linksys Smart Wi-Fi account so you can use the app to view or change your Velop system settings from anywhere you have an internet connection.
Other than plugging in the power and the ethernet cable, the app-based setup process does the work for you. Once connected, use the app to personalize your Wi-Fi by giving it a name and password. You also can give nodes names based on where they are so you can identify them in the rare case where things need attention.
Find a power source near to your modem or modem router. Connect to your first node.
If you have more than one node, they can be set up anywhere within range of another working node. Only one node has to be wired to the modem or modem router. Don’t worry, the app will help you place your nodes.
Print this page, then record your Wi-Fi and account settings in the table as a reference. Store your notes in a safe place.
Velop System Settings Using your Linksys app, you can view or change Velop system settings to make your Wi-Fi more secure or to work better with a device or game. You can access settings from anywhere in the world if you have an internet connection, but you can also access your Velop system directly from your home network if you are not online. Log in to your Linksys Smart Wi-Fi cloud account 1. Open the Linksys app. 2. Enter the email address you used when creating your account. 3.
Dashboard Dashboard is a snapshot of your Wi-Fi. See how many devices are connected to your Velop system. Share Wi-Fi password and allow guest access to your Wi-Fi. Dashboard also shows you if any devices have parental controls on them or have been prioritized for Wi-Fi access.
Devices View and change details for all devices connected to your Wi-Fi. You can view devices on your main network and your guest network, or display information about each device.
To view or change device details From the Devices screen you can edit device names and change the device icons. You also can prioritize devices, set parental controls, and see Wi-Fi details. Tap on any device to see details.
Wi-Fi Settings View or change your Wi-Fi name and password and connect devices using Wi-Fi Protected Setup™.
Advanced Settings Advanced users can change the default security type and Wi-Fi mode. Do not change these unless you have a lot of experience with Wi-Fi networks. Channel Finder will search for the most-open Wi-Fi channels in your area to ensure you get the best performance from your Velop system. If you have more than one node in your Velop system, Channel Finder will find the best channel for each node.
Connect a Device with WPS Wi-Fi Protected Setup allows you to easily connect wireless devices to your Wi-Fi without manually entering security settings.
Guest Access Use your Guest Access to allow guests to get online while restricting their access to other resources connected to your Wi-Fi. Send the password by text message or email.
Speed Test Run a speed test to make sure you are getting the speeds you are paying for. Speed test also helps in Device Prioritization because results determine how Wi-Fi is distributed to the prioritized devices. • Download speed is the rate at which internet content is transferred to your Velop system. • Upload speed is the rate at which you can upload content to the internet.
Parental Controls Parental controls allow you to control when your kids are online and what they’re doing there. Block internet to specific devices, or block specific websites.
Device Prioritization Choose up to three devices for priority usage of your internet connection. Those devices --- wired and/or wireless --- always will have the best access when connected. Velop runs a speed test to determine how to best distribute Wi-Fi to prioritized devices. Other devices will share the leftover capacity. Prioritized devices appear on Dashboard.
Notifications Velop can notify you when nodes in your system go offline. You can also ask Velop to alert you when a node is connected with an Ethernet cable to another node and is ready for setup. You have to turn on notifications in your mobile device settings to allow Velop to notify you.
Velop Administration Use the Velop Administration screen to change the admin password and hint, and check various identifiers (model number, serial number, and IP details) for all nodes in your Wi-Fi. Opt in to automatically report crashes to Linksys and contribute to improving the Wi-Fi experience. You also can manually report specific issues to Linksys.
The following information will be sent with your description of the issue: • App version • Login Type (cloud: show email address associated, local: display "Velop admin") • Device model • WAN Connection type (display Wi-Fi or Ethernet) • Device OS version • Time: date (mo/day/year, time, time zone) 25
Advanced Settings Internet Settings You can choose how your Velop system connects to the internet. The default is Automatic Configuration – DHCP. Other connection types depend on your internet service provider or how you plan to use your Velop system. Advanced users can use Additional Settings to clone MAC addresses and set MTU (maximum transmission unit).
Port Settings Port forwarding-----for a single port, multiple ports or a range of ports-----sends traffic inbound on a specific port or ports to a specific device or port on your Wi-Fi. In port range triggering, Velop watches outgoing data for specific port numbers. Velop remembers the IP address of the device that requests the data so that when the requested data returns, it is routed back to the proper device.
Wi-Fi MAC Filters Every network device has a unique 12-digit MAC (media access control) address. You can create a list of MAC addresses, and then allow or deny those devices on your Wi-Fi.
My Account Change your Linksys account password and opt in to receive the latest news and deals from Linksys.
Help Having trouble with the app? Just need a little more information about a feature? Tap Help for an explanation.
Feedback Here’s your chance to tell us what you think. Rate the app at your app store, send us a suggestion, or report an issue that’s keeping you from a great experience.
Connect Directly To Velop If you are not connected to the internet you still can access your Velop system. Connect to your Wi-Fi name, launch the Linksys app and tap Log in with Admin Password toward the bottom of the screen. You will not be able to access your Linksys Wi-Fi account when not online.
Velop admin password We created a secure Velop admin password during setup. To change it, tap Velop Administration and Change Admin Password and Hint. To keep your Velop system secure, we'll send you an email if someone changes the admin password.
How to restore factory defaults You should never need to factory reset your Velop-----a very disruptive process. A factory reset restores your Velop system to the state it was when you took it out of its box, requiring you to go through the setup process again. All settings you have customized in setup and since --- things such as Wi-Fi name, passwords, security type --- will be erased. All wireless devices will disconnect from your Wi-Fi.
Specifications Linksys Velop Model Name Velop Model Number WHW01/VLP01 Switch Port Speed 10/100/1000 Mbps Radio Frequency 2.4 GHz and 5 GHz # of Antennas 3 Ports Power, ethernet Buttons Power, Reset LEDs One, multicolored light for power and status Security Features WPA2-Personal Security Key Bits Up to 128-bit encryption Environmental Dimensions 3.1” x 3.1” x 5.5” (78.74 mm x 78.74 mm x 139.7 mm) Unit Weight 0.
Visit linksys.com/support/Velop for award-winning technical support. BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. © 2018 Belkin International, Inc. and/or its affiliates. All rights reserved.
LIN
What's in the box Bundle packs come with multiple nodes and power cords, but one ethernet cable. Only one node will be wired to the modem. The rest are connected wirelessly.
Network of nodes Every home is unique. Velop creates a modular mesh system of Wi-Fi nodes to provide wireless coverage throughout your home. Whether you have one node, three nodes, or more, we'll help you get them in the right spot - one at a time - for the best performance everywhere. I I .. - ,..:r ·• j.J. .
SETUP 1. Set up your first node Not your first node? Go to Adding nodes to a Velop system section on the back page. Choose either O or C, below: My internet comes from a Modem and Router 1 Disconnect and remove the old router. 2 Plug in your first node. ' e I " - ,, 1 , - 3 If you have more than one, choose any one. We'll help you set up the rest later. The light on your node will blink blue while powering on. Connect either port on your node to the modem with the provided ethernet cable.
SETUP My internet comes from a Single Device (Modem Rout er) 1 Leave the modem router connected. 2 Plug in your f irst node. ' If you have more than one, choose any one. We'll help you set up the rest later. I _, - • - The light on your node w ill ,, , ' blink blue while powering on. 3 Connect either port on your node to the modem router with the provided ethernet cable. The light will turn purple when the node is ready for setup.
SETUP 2. Get the Linksys app The Linksys app is required to complete setup. The app is available for iOS and Android . Download app www.linksys.com/app , • ll w ,10.11..I on th..-. AppStore Linksys Check node's lights The node is ready when light turns (after blinking blue while powering on). e Launch setup Open the app and tap "Launch Setup:' The app will automatically look for your node and begin setup instructions. Use the Linksys app to access Velop settings and featuresanytime, anywhere.
Node lights ' I ,, - • - Blue ,, I ' (blinking) Purple Powering on Wait for the node to finish powering on. Ready for setup Open the Linksys app to complete setup. ,, Purple Setup in progress (blinking) Follow instructions in the app . • Blue Connected to internet • Red / I Node is online, everything is good . No internet Not online, check with your ISP for service interruptions. ' I ,, - ,,• I ' - Red (blinking) Yellow Out of range Node isn't in range of another node. Move it closer.
Adding nodes to a Velop system If you already have a Velop system, using the app to add nodes is easy. 1 Open the Linksys app • Linksys 2 Log in to your Linksys Smart Wi-Fi account 3 Go to "Set Up a New Product" from the main menu 4 Select "Add a New Node" and follow setup instructions IIIIIIIIIIIIIIHIIIHIIIIII I~1111 34 . 88200 . 00B 8820-02655 Rev.
LINKSYS• VELOP"' REGULATORY Disclaimers and Legal Information Model# VLPO1 IMPORTANT! Specifications are subject to change without notice An active, customerpurchased Internet Service Provider broadband account is required for connection of this product and other connected devices to the Internet. Some devices may require additional wireless adapters or an Ethernet cable to connect.
• the warranty claim was made fraudulently or by misrepresentation; • the product was not installed, operated, repaired, or maintained in accordance with Belkin's instructions; • the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; • damage to the product is cosmetic, including scratches and dents, or defects caused by normal wear and tear or normal aging of the product; THE WARRANTIES AND REMEDIES SET OUT IN THIS AGREEMENT ARE EXCLUSIVE, AND, TO THE E
LIN
