Owner's Manual

LINKSYS
VELOP"'
Disclaimers and Legal Information
Specifications
are
subject
to
change
without
notice An active, customer-
purchased Internet Service Provider broadband account is required
for
connection
of
this
product
and
other
connected devices
to
the Internet.
Some devices may require additional wireless adapters
or
an Ethernet
cable
to
connect.
Maximum Performance derived from IEEE Standard
802
.
11
specifications.
Actual performance may vary, including lower wireless network capacity,
data throughput rate, speed, range and coverage. Performance depends
upon many factors, conditions and variables, including building materials
and construction, volume
of
network traffic, mix
of
wireless products used,
interference and other adverse conditions.
In
order
to
achieve the best
performance, this product must be used
with
compatible AC1200 wireless
devices. The standard transmission rates for each
node-867
Mbps {for 5
GHz radio),
300
Mbps {for
2.4
GHz)-are
the physical data rates. Actual
data throughput will be lower and may depend on the mix
of
wireless
products used and external factors.
Recommendations regarding products based
on
your Internet Plan
are provided
as
a guide only. Maximum speed may
vary
depending
on
the
service provided by your
Internet
service provider.
100/300
Mbps
represent
the
maximum throughput you can achieve
with
the Internet
Plan provided by your Internet service provider. Actual throughput will
be lower than
100/300
Mbps, as
this
throughput
is dependent
on
your
contract with
your
Internet service
provider.
May
require a software/firmware
update
available
for
download
at
linksys.com/support.
Each node in the wireless system provides a range
of
up
to
1,500
square
feet
or
the approximate size
of
a 1-2 Bedroom house
or
apartment. Range
can vary
with
the number and placement
of
nodes
In
the system. Range
specifications are based on performance
test
results under normal
use case conditions. Actual ranges will vary depending on wireless
interference, physical obstructions, operating environments and building
material. Wireless coverage claims are used only as reference and are not
guaranteed,
as
each
wireless
network
is
unique.
Coverage statements regarding house
or
apartment size are provided as a
guide only. Each node
in
the wireless system provides additional coverage.
Additional nodes (available
for
purchase separately) may be required
for
especially large houses/apartments
or
buildings
with
thick or dense walls.
Coverage
of
all homes cannot be guaranteed due
to
variations in size,
layout, building materials and the level
of
wireless interference present.
C
20
18 Belkin International, Inc. and/or
its
affiliates. All rights reserved.
Be
lk
in, Linksys, Velop and many
product
names and logos are trademarks
of
the Belkin
group
of
companies.
Third-party
trademarks mentioned
are
the
property
of
their respective owners. Apple and the Apple logo
are trademarks
of
Apple Inc., registered
in
the U.S. and
other
countries.
App
Store
is
a service
mark
of
App
le
Inc. Android and Google Play are
trademarks
of
Google Inc.
Bluetooth•
is
a registered trademark owned
by
Bluetooth SIG Inc. and
its
use
by
Belkin is under license. Wi·Fi and Wi·Fi
Protected
Set
up are
either
trademarks
or
registered trademarks
of
the
Wi·Fi Alliance. The Wi-Fi CERTIFIED
Logo
is a
certification
mark
of
the
Wi·Fi Alliance.
LIN<SYS
'
\Y/~U:@r~)"
WHOLE
HOME
Wl
·
FI
8850-00649
Rev.
AOO
1111111111111111m1111111m11111
34
.
GSAQ4
.
00L
REGULATORY
Model#
VLPO1
FCC Statement
This device complies with Part 15
of
the
FCC
Rules. Operation is subject
to
the following
two
conditions:
(1)
This device may
not
cause harmful
interference, and
(2)
this device must accept any interference received,
including interference
that
may cause undesired operation.
This product has been tested
and
complies
with
the specifications
for
a
Class B digital device, pursuant
to
Part 15
of
the
FCC
Rules. These limits
are designed
to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy
and,
if
not installed and used according
to
the
instructions,
may
cause
harmful
interference to
radio
communications
.
However, there
is
no guarantee
that
interference will
not
occur
In
a particular
installation.
If
this
equipment does cause harmful interference
to
radio
or
television reception, which is found by turning the equipment
off
and on, the
user
is
encouraged
to
try
to
correct the interference by one
or
more
of
the
following measures:
Reorient
or
relocate the receiving antenna.
Increase the separation between the equipment and devices.
Connect the equipment
to
an outlet other than the receiver's
Consult a dealer
or
an experienced radio/TV technician for assistance.
FCC Caution:
Any
changes
or
modifications
not
expressly approved
by
the
party
responsible
for
compliance could void the user's
authority
to
operate
this
equipment
2.4GHz
operation
of
this
product
in the
USA
is firmware-limited
to
channels 1 through
11.
The device
for
the
band
5150-5250
MHz
is only
for
indoor usage
to
reduce
the
potential
for
harmful interference
to
co-channel mobile
statellite
systems.
FCC Radiation Exposure
Statement
This equipment complies
with
FCC radiation exposure
limits
set
forth
for
an uncontrolled environment. This equipment should be installed and
operated
with
a minimum distance
of
35
cm
between the radiator and
your body.
This device and
its
antennas(s)
must
not
be co-located
or
operating in
conjunction with any other antenna
or
transmitter except in accordance
with
FCC multi-transmitter
product
procedures.
Safety
Notices
English
..a.
WARNING: Do
not
use
this
product
near
water,
for
example, in a
18
wet basement
or
near a
swimming
pool.
.&
WARNING: Avoid using
this
product
during an electrical storm.
~
There may be a remote risk
of
electric shock
from
lightning.
A WARNING: This
product
may contain chemicals, known
to
the
al
Sta
te
of
California
to
cause cancer, and
birth
defects
or
other
reproductive harm. Wash hands
after
handling.
A WARNING: The main power connection
at
the AC plug
or
AC cord
~
plug
is
the
equipment's disconnect device. The
power
outlet
must
be
located nearby the equipment and
its
access
must
be
easy.
Third-Party
Software
or
Firmware
The use
of
sof
tware
or
fi
rm
ware
not
supported/provided
by
Linksys
products
may re
sult
in
the
equipment no longer being compliant
with
the
regulatory
requirements.
Technical
Documents
on www.linksys.com
Follow these
steps
to
access technical documents:
Enter www.linksys.com in your web browser.
Select
the
country
or
region in which you live.
Click
the
Support
tab.
Type the model
number
or
keyword.
Select Downloads
from
the
list
of
tabs
.
Select the version
of
product.
Click
on
the
document you
want
and
it
will open in PDF
format
if
you have
Adobe Reader installed
on
your computer.
WEB:
For
additional information, please
visit
http://linksys.com
WARRANTY
AND
SUPPORT
INFORMATION
IMPORTANT!
PLEASE RETAIN PROOF
OF
PURCHASE
AND
PRODUCT WARRANTY
INFORMATION
LIMITED WARRANTY
{UNITED STATES
AND
CANADA)
This warranty
is
provided
to
you by Belkin International, Inc,
or
one
of
its
subsidiaries
or
affiliates ("Belkin")
IMPORTANT NOTICE REGARDING YOUR
CONSUMER
RIGHTS
The benefits we give in this manufacturer's warranty are additional
to
any
rights and remedies
that
you may have under local consumer protection
laws. Nothing
In
this warranty limits
or
affects your legal rights.
This manufacturer's
warranty
is
governed
by
the
laws
of
the
country
in which you purchased your Belkin, Linksys
or
Wemo product. In many
countries, consumers have rights under local
consumer
laws.
Those
consumer
rights
may
differ
between countries,
states
and provinces, and
often
cannot
be
excluded. Your local consumer
rights
organization can
advise you
on
your legal
rights
.
This manufacturer's warranty is
not
intended to:
change
or
exclude any rights under consumer law that cannot be lawfully
changed or excluded;
or
limit
or
exclude any
right
you have against the person who sold the Belkin,
Linksys
or
Wemo product
to
you
if
that
person has breached their sales
contract with you.
WHAT DOES THIS
WARRANTY
COVER?
Belkin warrants
that
the
product
hardware and any
software
media (i.e.,
media on which the
product
software
is
provided)
will
be free
from
defects
in materials and workmanship under normal use during the
Warranty
Period described below. This means
that
the
product
won't
be defective,
and
that
it
will look and
work
as advertised
during
the relevant period.
This
warranty
does
not
apply
to
products
purchased from a source
other
than Belkin
or
a Belkin Authorized Reseller.
How long is
the
product warranted?
Belkin
warrants
that
the hardware
in
this
Belkin, Linksys
or
Wemo
product, and any associated
software
media, will be free
from
defects
in
materials and workmanship under normal use during the Warranty Period.
The Warranty Period begins
on
the date
the
product
was
purchased by
the
original end-user purchaser
and
lasts
for
the period
set
out
in the
table
below:
Product Type
Warranty Period
New products
3years
Refurbished products
90
days
Repaired
or
replacement products
The longer
of
the original
Warranty
Pe
riod
or
30
days
Software media (if provided
with
90days
the product)
A claim
under
this
warranty
is
only eligible
if it
is
made
within
the
Warranty
Period.
What
isn't covered?
Belkin does
not
give
any
warranty
:
in relation
to
software
or
services, provided
by
Belkin
or
any
third
party,
included in
or
with
the
product;
that
the product,
software
or
services will always operate uninterrupted
or
error
free;
that
the product,
software
or
services,
or
any
equipment, system
or
network
on which
the
product,
software
or
services are used
are
100%
secure and
cannot
be hacked;
or
that
a third
party
service
the
product
needs will always be available.
Note:
Although
Belkin
does
n
ot
make
these
promises
in
this
warranty,
you
may have
additional
rights
under
consumer
laws
Will this
warranty
always apply?
This
warranty
does
not
apply if:
the
product
has been
tampered
with
or
the
assembly seal has been
removed
or
damaged;
the
product
has been
altered
or
modified
by
someone
other
than Belkin;