Wireless-N ADSL2+ Gateway The Factory Defaults Tab If you want to restore the Gateway’s factory default settings, then use this screen. Factory Defaults Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your settings, click Restore Factory Defaults. Then follow the on-screen instructions. Click Help for more information. The Firmware Upgrade Tab Use this screen to upgrade the Gateway’s firmware.
Wireless-N ADSL2+ Gateway The Status Tab The Gateway Tab This screen displays information about the Gateway and its Internet connection. Gateway Information This section displays the Gateway’s Firmware Version, MAC Address, and Current Time. Internet Connection This section shows the following information: Login Type, Interface, IP Address, Subnet Mask, Default Gateway, and DNS 1, 2, and 3 server IP addresses. Figure 5-48: Gateway DHCP Renew.
Wireless-N ADSL2+ Gateway The Local Network Tab This screen displays information about the Gateway’s local network. Local Network This screen displays the following: the local Mac Address, IP Address, Subnet Mask, DHCP Server, Start IP Address, and End IP Address. To view the DHCP Client Table, click the DHCP Client Table button. To view the ARP/RARP Table, click the ARP/RARP Table button. DHCP Clients Table. The DHCP Active IP Table shows the current DHCP Client data.
Wireless-N ADSL2+ Gateway The Wireless Tab This screen displays information about the Gateway’s wireless network. Wireless Network This screen displays the following: MAC Address, Mode, Network Name (SSID), Radio Band, Wide Channel, Standard Channel, Security method, and SSID Broadcast status. Click the Refresh button if you want to refresh the displayed information. Click Help for more information.
Wireless-N ADSL2+ Gateway The DSL Connection Tab This screen shows information about the DSL connection. DSL Status This section shows the following: Status, Downstream Rate, and Upstream Rate. PVC Connection This section displays the following information: Encapsulation, Multiplexing, QoS, Pcr Rate, Scr Rate, Autodetect, VPI, VCI, Enable status, and PVC Status. Click the Refresh button if you want to refresh the displayed information. Click Help for more information.
Wireless-N ADSL2+ Gateway Appendi x A: Troubl eshooti ng This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Gateway. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys international website at www.linksys.com. Common Problems and Solutions 1. I need to set a static IP address on a computer.
Wireless-N ADSL2+ Gateway 7. Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information. 8. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window. 9. Restart the computer if asked.
Wireless-N ADSL2+ Gateway For Windows 98 and Me: • Click Start and Run. In the Open field, type in command. Press the Enter key or click the OK button. For Windows NT, 2000, and XP: • Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key. • If you get a reply, the computer is communicating with the Gateway.
Wireless-N ADSL2+ Gateway 3. Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up popup window.” 5. I can’t get my Virtual Private Network (VPN) working through the Gateway. Access the Gateway’s web interface by going to http://192.168.1.1 or the IP address of the Gateway, and go to the Security tab. Make sure you have IPsec passthrough and/or PPTP pass-through enabled.
Wireless-N ADSL2+ Gateway field provided. Check “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. 6. Check the Enable option for the port services you want to use. Consider the example below: Application Start and End Protocol IP Address Enable Web server 80 to 80 Both 192.168.1.100 X FTP server 21 to 21 TCP 192.168.1.101 X SMTP (outgoing) 25 to 25 Both 192.168.1.102 X POP3 (incoming) 110 to 110 Both 192.168.1.
Wireless-N ADSL2+ Gateway Application Start and End Protocol IP Address Enable PC Anywhere 5631 to 5631 UDP 192.168.1.102 X VPN IPSEC 500 to 500 UDP 192.168.1.100 X When you have completed the configuration, click the Save Settings button. 8. I can’t get the Internet game, server, or application to work. If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one computer to the Internet using DeMilitarized Zone (DMZ) hosting.
Wireless-N ADSL2+ Gateway • For Microsoft Internet Explorer 5.0 or higher: 1. Click Start, Settings, and Control Panel. Double-click Internet Options. 2. Click the Connections tab. 3. Click the LAN settings button and remove anything that is checked. 4. Click the OK button to go back to the previous screen. 5. Click the option Never dial a connection. This will remove any dial-up pop-ups for PPPoE users. • For Netscape 6 or higher: 1.
Wireless-N ADSL2+ Gateway • Perform the upgrade using the TFTP program or the Gateway’s Web-based Utility through its Administration tab. 14. My DSL service’s PPPoE is always disconnecting. PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet. • There is a setup option to “keep alive” the connection.
Wireless-N ADSL2+ Gateway to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try using the following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0. 17. When I enter a URL or IP address, I get a time-out error or am prompted to retry. • Check if other computers work. If they do, ensure that your computer’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.
Wireless-N ADSL2+ Gateway Does the Gateway support IPX or AppleTalk? No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications. IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but those protocols cannot connect from the Internet to a LAN.
Wireless-N ADSL2+ Gateway How do I get Half-Life: Team Fortress to work with the Gateway? The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at the same time, even if on the same LAN (not a problem with 1.0.1.3).
Wireless-N ADSL2+ Gateway want to use DMZ Hosting. To get the LAN IP address, see “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter.” If DMZ Hosting is used, does the exposed user share the public IP with the Gateway? No. Does the Gateway pass PPTP packets or actively route PPTP sessions? The Gateway allows PPTP packets to pass through. Is the Gateway cross-platform compatible? Any platform that supports Ethernet and TCP/IP is compatible with the Gateway.
Wireless-N ADSL2+ Gateway What is the IEEE 802.11b standard? It is one of the IEEE standards for wireless networks. The 802.11b standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11b standard. The 802.11b standard states a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. What IEEE 802.11b and 802.11g features are supported? The product supports the following IEEE 802.11b and IEEE 802.
Wireless-N ADSL2+ Gateway acknowledgment from its original access point, it undertakes a new search. Upon finding a new access point, it then re-registers, and the communication process continues. What is the ISM band? The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide.
Wireless-N ADSL2+ Gateway practical purposes, this number is usually permanent. Unlike IP addresses, which can change every time a computer logs onto the network, the MAC address of a device stays the same, making it a valuable identifier for the network. How do I reset the Gateway? Press the Reset button on the back panel for about ten seconds. This will reset the Gateway to its default settings.
Wireless-N ADSL2+ Gateway Appendi x B: Wi rel ess Securi t y Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Wireless-N ADSL2+ Gateway SSID. There are several things to keep in mind about the SSID: 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.
Wireless-N ADSL2+ Gateway WPA-Personal. Select the type of algorithm, TKIP or AES, enter a password in the Passphrase field of 8-63 characters, and enter a Group Key Renewal period time between 0 and 99,999 seconds, which instructs the Gateway or other device how often it should change the encryption keys. WPA2-Personal. WPA2 gives you one encryption method, AES, with dynamic encryption keys. Enter a Passphrase of 8-63 characters.
Wireless-N ADSL2+ Gateway Appendi x C: Fi ndi ng the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering feature of the Gateway. You can also find the IP address of your computer’s Ethernet adapter. This IP address is used for the Gateway’s filtering, forwarding, and/or DMZ features.
Wireless-N ADSL2+ Gateway Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. NOTE: The MAC address is also called the Physical Address. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3. Write down the Physical Address as shown on your computer screen (Figure C-3); it is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters.
Wireless-N ADSL2+ Gateway Appendi x D: Upgradi ng Fi rmware To upgrade the Gateway’s firmware: 1. Download the Gateway’s firmware upgrade file from www.linksys.com/international. 2. Extract the file on your computer. 3. Open the Gateway’s Web-based Utility and click the Administration tab. 4. Click the Firmware Upgrade tab. 5. Click the Browse button to find the extracted file, and then double-click it. 6. Click the Upgrade button, and follow the on-screen instructions.
Wireless-N ADSL2+ Gateway Appendi x E: Gl ossar y This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also used to expand the range of a wireless network.
Wireless-N ADSL2+ Gateway DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. Domain - A specific name for a network of computers. Download - To receive a file transmitted over a network. DSL (Digital Subscriber Line) - An always-on broadband connection over traditional phone lines.
Wireless-N ADSL2+ Gateway IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer. ISP (Internet Service Provider) - A company that provides access to the Internet. LAN - The computers and networking products that make up your local network.
Wireless-N ADSL2+ Gateway RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services.
Wireless-N ADSL2+ Gateway TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network. URL (Uniform Resource Locator) - The address of a file located on the Internet.
Wireless-N ADSL2+ Gateway Appendi x F: Speci fi cati ons Model Number WAG325N V2 Standards Draft802.11n,802.11g,802.
Wireless-N ADSL2+ Gateway Security Features Password protected configuration for web access PAP and CHAP authentication Denial of Service (DoS) Prevention URL filtering, and keyword, Java, ActiveX, Proxy, Cookie blocking ToD filter (Blocks Access by Time VPN Passthrough for IPSec, PPTP, and L2TP Protocols 128, 64 bits WEP with Passphrase WEP key generation SSID Broadcast Disable Access restriction by MAC and IP addresses WEP Key Bits 64, 128 Dimensions 140 mm x 140 mm x 27 mm Unit Weight 0.
Wireless-N ADSL2+ Gateway Appendi x G: Warrant y Informati on Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser.
Wireless-N ADSL2+ Gateway Appendi x I: Regul ator y Informati on This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.
Wireless-N ADSL2+ Gateway IC Statement Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Règlement d’Industry Canada Le fonctionnement est soumis aux conditions suivantes : 1. Ce périphérique ne doit pas causer d'interférences; 2.
Wireless-N ADSL2+ Gateway Compliance Information for 2,4GHz Wireless Product Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) Appendix I: Regulatory Information 93
Wireless-N ADSL2+ Gateway NOTE: For all products, the Declaration of Conformity (DofC) is available through one or more of these options: • A pdf file is included on the product's CD. • A print copy is included with the product. • A pdf file is available on the product's webpage. Visit www.linksys.com/international and select your country or region. Then select your product. If you need any other technical documentation, see the “Technical Documents on www.linksys.
Wireless-N ADSL2+ Gateway National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous: Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive
Wireless-N ADSL2+ Gateway The following countries have restrictions and/or requirements in addition to those given in Table 1: France For 2,4 GHz, the output power is restricted to 10 mW eirp when the product is used outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band. Check http://www.arcep.fr/ for more details. Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e.
Wireless-N ADSL2+ Gateway Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details. Notes: (1) Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. (2) The regulatory limits for maximum output power are specified in eirp.
Wireless-N ADSL2+ Gateway Wireless Adapters For wireless adapters operating in the 2,4-GHz band, the typical radiated output power is 18 dBm EIRP, while the maximum radiated output power will not exceed 20 dBm Windows XP 1. Double-click the Wireless icon in your desktop’s system tray. 2. Open the Wireless Network Connection window. 3. Click the Properties button. 4. Select the General tab, and click the Configure button. 5. In the Properties window, click the Advanced tab. 6. Select Power Output. 7.
Wireless-N ADSL2+ Gateway Wireless Access Points, Routers, or Other Wireless Products If you have a different wireless product, use its Web-based Utility to configure its power output setting (refer to the product’s documentation for more information). Technical Documents on www.linksys.com/international Follow these steps to access technical documents: 1. Enter http://www.linksys.com/international in your web browser. 2. Select the country or region in which you live. 3. Click the Products tab. 4.
Wireless-N ADSL2+ Gateway User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Wireless-N ADSL2+ Gateway Appendix I: Regulatory Information 101
Wireless-N ADSL2+ Gateway Appendix I: Regulatory Information 102
Wireless-N ADSL2+ Gateway Appendix I: Regulatory Information 103
Wireless-N ADSL2+ Gateway For more information, visit www.linksys.com.
Wireless-N ADSL2+ Gateway Appendi x J: Contact Informati on Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com Belgium support.be@linksys.com Czech Republic support.cz@linksys.com Denmark support.dk@linksys.com Finland support.fi@linksys.com France support.
Wireless-N ADSL2+ Gateway In Europe E-mail Address Switzerland support.ch@linksys.com United Kingdom support.uk@linksys.com Outside of Europe E-mail Address Asia Pacific asiasupport@linksys.com (English only) Latin America support.portuguese@linksys.com or support.spanish@linksys.com Middle East & Africa support.mea@linksys.com (English only) South Africa support.ze@linksys.com (English only) UAE support.ae@linksys.com (English only) U.S. and Canada support@linksys.