Operation Manual

22
Chapter 5: Configuring the Gateway
The Setup Tab
Wireless-G ADSL Gateway
• Interface. Select LAN & Wireless or Internet, depending on the location of the static route’s final
destination.
• Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed
through your LAN. For each route, the Destination IP address, Subnet Mask, Gateway, and Interface are
displayed. Click the Refresh button to update the information. Click the Close button to return to the
previous screen.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Figure 5-13: Routing Table