User Manual
Table Of Contents
- Chapter 1: Planning Your Network
- Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports
- Chapter 3: Connecting the Wireless-G ADSL Gateway
- Chapter 4: Configuring the Gateway
- Chapter 5: Using the Linksys Parental Control Service
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
- Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter
- Appendix E: Upgrading Firmware
- Appendix F: Windows Help
- Appendix G: Glossary
- Appendix H: Specifications
- Appendix I: Warranty Information
- Appendix J: Regulatory Information
- Appendix K: Contact Information
93
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
Introduction
Wireless-G ADSL Gateway with 2 Phone Ports
Appendi x C: Confi guri ng IPSec between a Wi ndows 2000 or
XP Computer and the Gateway
Introduction
This document demonstrates how to establish a secure IPSec tunnel using preshared keys to join a private
network inside the Gateway and a Windows 2000 or XP computer. You can find detailed information on
configuring the Windows 2000 server at the Microsoft website:
Microsoft KB Q252735 - How to Configure IPSec Tunneling in Window s 2000
http://support.microsoft.com/support/kb/articles/Q252/7/35.asp
Microsoft KB Q257225 - Basic IPSec Troubleshooting in Windows 2000
http://support.microsoft.com/support/kb/articles/Q257/2/25.asp
Environment
The IP addresses and other specifics mentioned in this appendix are for illustration purposes only.
Window s 2000 or Windows XP
IP Address: 140.111.1.2 < = User ISP provides IP Address; this is only an example.
Subnet Mask: 255.255.255.0
WAG54G
WAN IP Address: 140.111.1.1 < = User ISP provides IP Address; this is only an example.
Subnet Mask: 255.255.255.0
LAN IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
NOTE: Keep a record of any changes you make. Those
changes will be identical in the Windows “ secpol”
application and the Gateway’s Web-Based Utility.
NOTE: This section’s instructions and figures refer to
the Gateway. Substitute “ Gateway” for “ Router” . Also,
the text on your screen may differ from the text in your
instructions for “ OK or Close” ; click the appropriate
button on your screen.