User Manual
Table Of Contents
- Chapter 1: Planning Your Network
- Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports
- Chapter 3: Connecting the Wireless-G ADSL Gateway
- Chapter 4: Configuring the Gateway
- Chapter 5: Using the Linksys Parental Control Service
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
- Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter
- Appendix E: Upgrading Firmware
- Appendix F: Windows Help
- Appendix G: Glossary
- Appendix H: Specifications
- Appendix I: Warranty Information
- Appendix J: Regulatory Information
- Appendix K: Contact Information
12
Chapter 4: Configuring the Gateway
Overview
Wireless-G ADSL Gateway with 2 Phone Ports
Security
• Firewall. This screen contains Filters and Block WAN Requests. Filters block specific internal users from
accessing the Internet and block anonymous Internet requests.
• VPN. To enable or disable IPSec, PPPoE, L2TP, and/or PPTP Pass-through, and set up VPN tunnels, use this
screen.
Access Restrictions
• Parental Control. This screen allows parents to manage Internet access by all of the network’s users.
• Internet Access. This screen allows you to prevent or permit only certain users from attaching to your
network.
Applications & Gaming
• Single Port Forwarding. Use this screen to set up common services or applications on your network.
• Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.
• Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
• DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
• QoS. This allow s prioritization of applications on your network.
Administration
• Management. On this screen, alter Gateway access privileges, SNMP, UPnP, and WT-82 settings.
• Reporting. If you want to view or save activity logs, click this tab.
• Diagnostics. Use this screen to do a Ping Test.
• Backup & Restore. From this screen, you can backup and restore the Gateway’s settings.
• Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.
• Firmware Upgrade. Click this tab if you want to upgrade the Gateway’s firmware.