User Manual
Table Of Contents
- Chapter 1: Planning Your Network
- Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports
- Chapter 3: Connecting the Wireless-G ADSL Gateway
- Chapter 4: Configuring the Gateway
- Chapter 5: Using the Linksys Parental Control Service
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
- Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter
- Appendix E: Upgrading Firmware
- Appendix F: Windows Help
- Appendix G: Glossary
- Appendix H: Specifications
- Appendix I: Warranty Information
- Appendix J: Regulatory Information
- Appendix K: Contact Information
44
Chapter 4: Configuring the Gateway
The Applications and Gaming Tab
Wireless-G ADSL Gateway with 2 Phone Ports
Telnet . A terminal emulation protocol commonly used on Internet and TCP/IP-based netw orks. It allows a user at a terminal or
computer to log onto a remote device and run a program.
SMTP (Simple Mail Transfer Protocol). The standard e-mail protocol on the Internet. It is a TCP/IP protocol that defines the
message format and the message transfer agent (MTA), which stores and forwards the mail.
POP3 (Post Office Protocol 3). A standard mail server commonly used on the Internet. It provides a message store that holds
incoming e-mail until users log on and dow nload it. POP3 is a simple system with little selectivity. All pending messages and
attachments are downloaded at the same time. POP3 uses the SMTP messaging protocol.
Specific Port#. You can add three additional applications by entering their respective port numbers in the Specific Port#
fields.
Advanced QoS
This setting allows you to specify traffic queue priority.
Fragment packet’s size of AF and BE traffic to be equal to the size of EF traffic. Select this option to
fragmentize the packet sizes for AF (Assured Forwarding) and BE (Best Effort) queues so that it will increase the
efficiency for transporting EF (expedited forwarding) queues. Enter a range betw een 68~ 1492 bytes.
Enable 802.1p P bits scheduling. VLAN’s VID. Select this option to enable 802.1p P bits classification
scheduling in the appropriate VLAN based on IEEE 802.1Q VLAN identification. Enter the VLAN VID (VLAN
Identifier) number in the field.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.