Owner's Manual

20
Chapter 5: Configuring the Wireless-G Cable Gateway
Overview
Wireless-G Cable Gateway
Access Restrictions
• Website Blocking. You are allowed to filter website access on this screen.
• Timed Access. This screen allows you to limit the days or hours of access to the network.
• Filter Internet Traffic. You can filter or block ports from Internet access by IP address or port range on this
screen.
Applications & Gaming
• Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.
• Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
• DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
Administration
• Security. On this screen, alter Gateway access privileges, UPnP settings, Reporting settings, and Log settings.
• Diagnostics. Use this screen to do a Ping Test.
• Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.
• Advanced. This screen allows you to perform the advanced administration functions of Restore Factory
Defaults, as well as Routing and NAT disabling.
Status
• Gateway. This screen provides general and status information about the Gateway.
• Connection. This screen provides information about the cable connection.
• Local Network. This screen allows you to release a DHCP client from the local network server.
• Modem Log. This screen provides a log of the built-in modem’s activity.