Manualshelf

Owner's Manual

ManualsBrandsLinksys ManualsNetwork RouterWCG200
31323334353637383940
31
Chapter 5: Configuring the Wireless-G Cable Gateway
The Wireless Tab
Wireless-G Cable Gateway
WDS Tab
Wireless Distribution System. This feature enables the Gateway to talk to a remote device within its range so it
can retransmit the signal or it can enable a wireless connection between two wired networks. The other device(s)
must support a compatible version of WDS bridging or WDS repeating.
To use this feature, click Enable and enter the wireless MAC address of the remote device in the MAC field. You
can have up to four remote devices.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Figure 5-17: WDS Tab