- LinkSys Wireless Speaker User Guide Wireless-B WML11B/WMLS11B

25
Chapter 5: Connecting the Wireless-B Media Link for Music to Your Audio System
Using the LCD Menus to Set up the Media Link
Wireless-B Media Link for Music
DHCP
To change the Media Link’s DHCP setting, select DHCP. If the Media Link will be assigned an IP address
automatically by a router or other DHCP server, then select Enable. You will not see the IP Address, Subnet Mask,
Gateway, and DNS Server menus because these settings will be set automatically. If the Media Link needs a static
IP address, then select Disable. You will need to configure the IP Address, Subnet Mask, Gateway, and at least
one of the DNS Server settings.
Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting.
Press the left arrow button to cancel your change.
IP Address
To change the Media Link’s static IP address, select IP Address. Use the arrow keys to scroll through the
numbers 0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow
button to save your new setting. Press the left arrow button to cancel your change.
Subnet Mask
To change the Media Links subnet mask, select Subnet Mask. Use the arrow keys to scroll through the numbers
0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save
your new setting. Press the left arrow button to cancel your change.
Gateway
To change the Media Link’s gateway, select Gateway. Use the arrow keys to scroll through the numbers 0-9 and
punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save your
new setting. Press the left arrow button to cancel your change.
DNS Server 1 and DNS Server 2
To change the Media Link’s DNS server address, select DNS Server 1 and/or DNS Server 2. (You must enter at
least one DNS server address.) Use the arrow keys to scroll through the numbers 0-9 and punctuation (a period).
To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left
arrow button to cancel your change.
For information about the other LCD menus, refer to “Chapter 6: Using the LCD Menus of the Wireless-B Media
LInk for Music.
After you have finished configuring the Media Links network settings, proceed to the next section,
“Installing the Media Server Software.
Figure 5-19: TCP/IP Screen
Figure 5-20: IP Address Screen
Static IP address: a fixed address assigned to
a computer or device connected to a network.