Quick Start Manual

6
The next screen to appear will be
the Available Wireless Networks
screen. From this screen, you can
launch one of the two setup
methods.
Setting Up the Adapter
with Available Networks
On the Available Wireless
Networks screen, the available
networks are listed in the center
table by Wireless Network Name.
Select the wireless network you
wish to connect to and click the
Connect button. (If you do not
see your network listed, you can
click the Refresh button.)
If the network uses wireless
security, you will need to
configure security on the Adapter.
If not, you will be taken directly to
the Congratulations screen,
shown in Step B.
A If wireless security is
enabled on this network,
you will see one of these
wireless security screens.
3
Set up the Adapter
IMPORTANT: For quick installation,
use this document only if your
network appears on the Available
Wireless Networks screen.
Advanced Setup: If you are using
manual setup, click Advanced Setup
and follow the on-screen prompts.
Available Wireless
Networks