QUICK INSTALLATION GUIDE Wireless-N PCI Adapter with Dual-Band Model: Package Contents • Wireless-N PCI Adapter with Dual-Band • Setup Wizard CD-ROM • User Guide on CD-ROM • Quick Installation Guide • Antennas (2) • Low-Profile Bracket WMP600N
WMP600N Table of Contents Table of Contents Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Wi-Fi Protected Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address.
Installation WMP600N Installation Run the Setup Wizard on the enclosed CD to install and set up the Adapter. A. Insert the Setup Wizard CD into your CD-ROM drive. NOTE: Windows or other personal firewalls may ask for permission to run the software or program. You will need to allow the software to run in order to continue. Insert the CD-ROM B. The Welcome screen appears. Select the appropriate language. Click Next. C. Read the License Agreement.
WMP600N Installation D. Please wait while the Setup Wizard installs the driver for the Adapter. NOTE: If you have already installed the Adapter in the computer, proceed to step Q. E. To view instructions on how to install the Adapter in the computer, keep the default, View the instructions, and click Next. Proceed to step F. (To print the instructions, click Print the instructions before you click Next.) To skip the physical installation instructions, select Skip the instructions, and click Next.
Installation WMP600N G. Shut down your computer, and unplug its power cable. Click Next. H. Lay the computer on its side, and remove its cover. (Refer to your computer’s documentation for more information.) Click Next. I. Locate an available PCI slot. (Refer to your computer’s documentation for more information.) Click Next. J. Slide the Adapter into the PCI slot. You may have to apply pressure to slide the Adapter all the way in.
WMP600N Installation K. Attach the two antennas. Click Next. L. Replace the cover on your computer, and stand the computer back up. Position the antennas so that they are pointed upwards. Click Next. M. Plug the computer’s power cable into its electrical outlet. Power on your computer. When your computer has restarted, the Setup Wizard will automatically continue. Click Next. N. The steps for installing the Adapter are summarized. Click Next.
Installation WMP600N O. Select Yes, I want to shut down my computer. Save and close any open files. Close all other programs or applications. If you want to print the installation instructions, click Click here if you have not printed these instructions yet but would like to do so. Click Next, and follow the instructions in steps G to M of the Quick Installation Guide. Then proceed to step P of the Quick Installation Guide. P. After your computer reboots, the Setup Wizard automatically resumes.
WMP600N Installation R. Please wait while the Setup Wizard installs the Linksys Wireless Manager utility. S. Please wait while the Setup Wizard searches for wireless networks. T. The available networks are listed in the table. Select your network, and then click Connect. Proceed to step W. (If your router supports Wi-Fi Protected Setup, proceed to the section, “Wi-Fi Protected Setup”.) If your network is not listed, select My network is not in this list. Click Next.
Installation WMP600N U. Select Connect to hidden network. Click Next. V. Enter the name of your wireless network. Click Next. W. If your network uses wireless security, enter the security key of your wireless network. Click Next. If your network does not use wireless security, leave the security key field blank, and click Next. NOTE: If you are connecting to your own wireless network, you may want to configure wireless security on your router if you have not already done so.
WMP600N Installation X. Please wait while the Setup Wizard connects the Adapter to your wireless network. Warnings from your firewall or security application may appear. If necessary, click Always allow or Allow this time only to allow the wireless connection. Y. The Adapter is connected to your wireless network. Click Finish. Z. The settings of the Adapter are saved to your desktop as Linksys Adapter.txt (a text file). Click OK.
Wi-Fi Protected Setup WMP600N Wi-Fi Protected Setup Use Wi-Fi Protected Setup to create a wireless connection between the Adapter and your router. A. On your router, press the button that looks like one of the icons in the picture. You may have to hold down this button until an LED flashes. Wi-Fi Protected Setup Button on Router Within two minutes, click Connect on the Quickly Connect Using Push Button screen. Then proceed to step C.
WMP600N Wi-Fi Protected Setup D. The Adapter is connected to your wireless network. Click Finish. E. The settings of the Adapter are saved to your desktop as Linksys Adapter.txt (a text file). Click OK. F. The Linksys Wireless Manager icon appears on your desktop’s system tray. Use this utility to change wireless settings or connect to a different wireless network. You can access the utility from the Start menu, or double-click the Manager icon in the system tray. Click OK.
Notes WMP600N 8121910NC-JL 12 Wireless-N PCI Adapter with Dual-Band
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM. Additional support is also available by phone or online. 24-Hour Technical Support 800-326-7114 RMA (Return Merchandise Authorization) http://www.linksys.com/warranty Website http://www.linksys.com FTP Site ftp://ftp.linksys.com Support http://www.linksys.com/support Sales Information 800-546-5797 (800-LINKSYS) Linksys, Cisco and the Cisco Logo are registered trademarks or trademarks of Cisco Systems, Inc.
