® A Division of Cisco Systems, Inc. 2.4 GHz Wireless-G 802.11g PCI Adapter WIRELESS Model No. WMP54G ver. 4.
Wireless-G PCI Adapter Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Wireless-G PCI Adapter Tabl e of Contents Chapter 1: Introduction 1 Welcome What’s in this Guide? 1 2 Chapter 2: Planning your Wireless Network Network Topology Roaming Network Layout Chapter 3: Setting up and Connecting the USB Network Adapter Starting the Setup Wizard Installing the Adapter Setting Up the Adapter Chapter 4: Using the Wireless Network Monitor Accessing the Wireless Network Monitor Link Information Screens Secure Easy Setup Site Survey Profiles Creating a New Profile Appendix A: Tro
Wireless-G PCI Adapter Li st of Fi gures Figure 3-1: Setup Wizard’s Welcome Screen Figure 3-2: Setup Wizard’s License Agreement Figure 3-3: The Connecting the Adapter Screen Figure 3-4: Installing the Adapter Figure 3-5: Positioning the Antenna Figure 3-6: Available Wireless Network Figure 3-7: Available Wireless Network Figure 3-8: Secure Easy Setup Figure 3-9: The Secure Easy Setup Logo and Location Figure 3-10: Secure Easy Setup Complete Figure 3-11: Available Wireless Network Figure 3-12: WEP Key Neede
Wireless-G PCI Adapter Figure 3-31: Confirm New Settings Figure 3-32: Congratulations Figure 4-1: Wireless Network Monitor Icon Figure 4-2: Link Information Figure 4-3: More Information - Wireless Network Status Figure 4-4: More Information - Wireless Network Statistics Figure 4-5: The Secure Easy Setup Button Figure 4-6: The Secure Easy Setup Logo and Location Figure 4-7: Secure Easy Setup Figure 4-8: Secure Easy Setup is Complete Figure 4-9: Site Survey Figure 4-10: WEP Key Needed for Connection Figure 4
Wireless-G PCI Adapter Figure 4-32: Wireless Security - WEP Figure 4-33: Wireless Security - WPA Personal Figure 4-34: Wireless Security - PSK2 Figure 4-35: Wireless Security - WPA Enterprise - EAP-TLS Figure 4-36: Wireless Security - WPA Enterprise - PEAP Figure 4-37: Wireless Security - RADIUS - EAP-TLS Figure 4-38: Wireless Security - RADIUS - PEAP Figure 4-39: LEAP - Windows XP and 2000 Figure 4-40: LEAP - Windows 98SE and ME Figure 4-41: Advanced Wireless Settings Figure 4-42: Confirm New Settings Fig
Wireless-G PCI Adapter Chapter 1: Introducti on Welcome Thank you for choosing the Wireless-G PCI Adapter. With this Adapter, your wireless networking experience will be faster and easier than ever. Like all wireless products, the Adapter allows for greater range and mobility within your wireless network. This adapter communicates over the 54Mbps 802.11g wireless standard, which is almost five times faster than 802.11b. But since they share the same 2.
Wireless-G PCI Adapter What’s in this Guide? This user guide covers the steps for setting up and using the Wireless-G PCI Adapter. • Chapter 1: Introduction This chapter describes the Adapter’s applications and this User Guide. • Chapter 2: Planning Your Wireless Network This chapter discusses a few of the basics about wireless networking. • Chapter 3: Setting Up and Connecting the PCI Adapter This chapter shows you how to setup and connect the Adapter.
Wireless-G PCI Adapter • Appendix I: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Wireless-G PCI Adapter Chapter 2: Pl anni ng your Wi rel ess Network Network Topology A wireless network is a group of computers, each equipped with one wireless adapter. Computers in a wireless network must be configured to share the same radio channel. Several PCs equipped with wireless cards or adapters can communicate with one another to form an ad-hoc network. Linksys wireless adapters also provide users access to a wired network when using an access point or wireless router.
Wireless-G PCI Adapter Network Layout Linksys wireless access points and wireless routers have been designed for use with 802.11a, 802.11b, and 802.11g products. With 802.11g products communicating with the 802.11b standard and some products incorporating both “a” and “g”, products using these standards can communicate with each other. Access points and wireless routers are compatible with 802.11a, 802.11b and 802.
Wireless-G PCI Adapter Chapter 3: Setting up and Connecting the USB Network Adapter The USB Network Adapter is set up with the Setup Wizard that comes on the CD enclosed with the Adapter. This chapter will guide you through the setup procedure. IMPORTANT: Do not connect the Adapter until you are instructed to do so or the setup will not work. Starting the Setup Wizard To begin the setup process, insert the Setup Wizard CD-ROM into your CD-ROM drive.
Wireless-G PCI Adapter 3. Windows will begin copying the files onto your PC. 4. The Setup Wizard will now prompt you to install the Adapter into your PC . Click Next and your PC will power down. After installing the Adapter, as shown below, and restarting your PC, the Setup Wizard will continue. Installing the Adapter 1. Before connecting the PCI Adapter to your PC, turn off your desktop PC. 2. Open your PC case and locate an available PCI slot on the motherboard.
Wireless-G PCI Adapter Setting Up the Adapter The next screen to appear will be the Available Wireless Network screen. This screen provides three options for setting up the Adapter • Secure Easy Setup. This Adapter features Secure Easy Setup. This means that you can set it up with just the press of a button when connecting to wireless routers or access points that also feature Secure Easy Setup. Both devices on the network must feature Secure Easy Setup for this to work. • Available Wireless Network.
Wireless-G PCI Adapter Setting Up the Adapter with Secure Easy Setup With Secure Easy Setup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the Secure Easy Setup button on the device you’re connecting the Adapter to, such as a wireless router or access point. 1. Starting from the Available Wireless Network screen, click the Secure Easy Setup button on the right hand side. Figure 3-7: Available Wireless Network 2.
Wireless-G PCI Adapter 3. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional Secure Easy Setup device. NOTE: You can only add one Secure Easy Setup device at a time. 4.
Wireless-G PCI Adapter Setting Up the Adapter with Available Networks If you’re not setting up the Adapter with Secure Easy Setup, another method for setting up the Adapter is with the available networks listed on the Available Wireless Network screen. The available networks are listed in the table on the center of the screen by SSID. Select the wireless network you wish to connect to and click the Connect button.
Wireless-G PCI Adapter WPA-Personal Needed for Connection Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be. Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
Wireless-G PCI Adapter 2. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect to Network to connect to your network. Figure 3-15: The Congratulations Screen Congratulations! Setup is complete. To check the link information, search for available wireless networks, or make additional configuration changes, refer to Chapter 4: Using the Wireless Network Monitor.
Wireless-G PCI Adapter Setting Up the Adapter with Manual Setup If you are not taking advantage of Secure Easy Setup and your network is not listed with the available networks, click Manual Setup on the Available Wireless Network screen to set up the adapter manually. 1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
Wireless-G PCI Adapter 2. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you want to connect to another wireless device directly without using a wireless router or access point. Then, enter the SSID for your network. Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point.
Wireless-G PCI Adapter 4. The Wireless Security screen will appear. This step will configure wireless security. If your wireless network doesn’t use wireless security, select Disabled and then click the Next button to continue. Proceed to Step 5. Select WEP, WPA-Personal, PSK2, WPA Enterprise, Radius, or LEAP for the Encryption Method.
Wireless-G PCI Adapter WPA Personal WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select TKIP or AES for encryption. Then enter a Passphrase that is 8-63 characters in length. Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
Wireless-G PCI Adapter WPA Enterprise WPA Enterprise features WPA security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA Enterprise offers two authentication methods, EAPTLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
Wireless-G PCI Adapter RADIUS RADIUS uses the security of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) It offers two authentication methods: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS Enter the Login name of your wireless network in the Login Name field. From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network.
Wireless-G PCI Adapter LEAP If you selected LEAP, then enter the Username and Password that will authenticate you on your wireless network. Windows XP and 2000 users can also enable LEAP CCKM, and select the Encryption, if they enabled CCX2.0 on the Advanced Wireless Settings screen. Username - Enter the username used for authentication. Password - Enter the password used for authentication. Confirm - Enter the password again.
Wireless-G PCI Adapter 5. The next screen displays all of the Adapter’s settings. If these are correct, you can save these settings to your hard drive by clicking Save. Click Next to continue and finish the setup. If these settings are not correct, click Back to change your settings. To exit the setup, click Exit. Figure 3-29: Confirm New Settings 6. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network.
Wireless-G PCI Adapter Chapter 4: Usi ng the Wi rel ess Network Moni tor Use the Wireless Network Monitor to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. Accessing the Wireless Network Monitor NOTE: The Wireless Network Monitor should only be accessed AFTER connecting the Adapter. For more information on Setting Up and Connecting the Adapter, refer to Chapter 3: Setting Up and Connecting the USB Network Adapter.
Wireless-G PCI Adapter Wireless Network Status The Wireless Network Status screen provides information on your current network settings. Status - This shows the status of the wireless network connection. SSID - This is the unique name of the wireless network. Wireless Mode - The mode of the wireless network currently in use is displayed here. Transfer Rate - The data transfer rate of the current connection is shown here. Channel - This is the channel to which the wireless network devices are set.
Wireless-G PCI Adapter Wireless Network Statistics The Wireless Networks Statistics screen provides statistics on your current network settings. Transmit Rate - This is the data transfer rate of the current connection. (In Auto mode, the Adapter dynamically shifts to the fastest data transfer rate possible at any given time.) Receive Rate - This is the rate at which data is received.
Wireless-G PCI Adapter Secure Easy Setup While using the Monitor, you might see the Secure Easy Setup button on the right-hand side of the screen. This button can be used to set up the Adapter, if this has not already been done. With Secure Easy Setup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the Secure Easy Setup button on the device you’re connecting the Adapter to, such as a wireless router or access point. 1.
Wireless-G PCI Adapter 2. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional Secure Easy Setup device. NOTE: You can only add one Secure Easy Setup device at a time. 3.
Wireless-G PCI Adapter Site Survey The Site Survey screen displays a list of available networks in the table on the left. The table shows each network’s SSID, Channel, and the quality of the wireless signal the Adapter is receiving. You may click SSID, CH (Channel), or Signal, to sort by that field. SSID - The SSID or unique name of the wireless network is displayed here. CH - This is the channel that the network uses. Signal - This is the percentage of signal strength, from 0 to 100%.
Wireless-G PCI Adapter If the network has PSK2 wireless security enabled, then you will see the PSK2 Needed for Connection screen. Enter the network’s Passphrase or pre-shared key in the Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel. Profiles The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and SSIDs.
Wireless-G PCI Adapter Creating a New Profile On the Profiles screen, click the New button to create a new profile. Enter a name for the new profile, and click the OK button. Click the Cancel button to return to the Profiles screen without entering a name. The Available Wireless Network screen will appear. This screen provides three options for setting up the Adapter • Secure Easy Setup. This Adapter features Secure Easy Setup.
Wireless-G PCI Adapter Setting Up the Adapter with Secure Easy Setup With Secure Easy Setup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the Secure Easy Setup button on the device you’re connecting the Adapter to, such as a wireless router or access point. 4. Starting from the Available Wireless Network screen, click the Secure Easy Setup button on the right hand side. 5.
Wireless-G PCI Adapter 6. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on the wireless router or access point when the Adapter has been successfully added to the network. Repeat this procedure for any additional Secure Easy Setup device. NOTE: You can only add one SecureEasySetup device at a time. 7.
Wireless-G PCI Adapter Setting Up the Adapter with Available Networks If you’re not setting up the Adapter with Secure Easy Setup, another method for setting up the Adapter is with the available networks listed on the Available Wireless Network screen. The available networks are listed in the table on the center of the screen by SSID. Select the wireless network you wish to connect to and click the Connect button.
Wireless-G PCI Adapter WPA-Personal Needed for Connection Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be. Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
Wireless-G PCI Adapter 2. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network. Congratulations! Setup is complete. Figure 4-26: The Congratulations Screen Setting Up the Adapter with Manual Setup If you are not taking advantage of Secure Easy Setup and your network is not listed among the available networks, click Manual Setup on the Available Wireless Network screen to set up the adapter manually. 1.
Wireless-G PCI Adapter If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, leave these fields empty. IP Address - This IP Address must be unique to your network.
Wireless-G PCI Adapter 3. If you chose Infrastructure Mode, go to Step 4 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen will appear. Select the correct Channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting. Then, select the Network Mode in which your wireless network will operate.
Wireless-G PCI Adapter WEP WEP - To use WEP encryption, select 64-bits or 128-bit characters from the drop-down menu, and enter a passphrase or key. WEP Key - The WEP key you enter must match the WEP key of your wireless network. If you are using 64-bit WEP encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.
Wireless-G PCI Adapter WPA Personal WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, TKIP or AES, for the Encryption Type. Enter a Passphrase of 8-63 characters in the Passphrase field. Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the previous screen. Figure 4-33: Wireless Security - WPA Personal PSK2 Enter a Passphrase of 8-63 characters in the Passphrase field.
Wireless-G PCI Adapter WPA Enterprise WPA Enterprise features WPA security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA Enterprise offers two authentication methods, EAPTLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
Wireless-G PCI Adapter RADIUS RADIUS uses the security of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) It offers two authentication methods: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS Enter the Login name of your wireless network in the Login Name field. From the Certificate drop-down menu, select the certificate you have installed to authenticate you on your wireless network.
Wireless-G PCI Adapter LEAP If you selected LEAP, then enter the Username and Password that will authenticate you on your wireless network. Windows XP and 2000 users can also enable LEAP CCKM, and select the Encryption, if they enabled CCX2.0 on the Advanced Wireless Settings screen. Username - Enter the username used for authentication. Password - Enter the password used for authentication. Confirm - Enter the password again.
Wireless-G PCI Adapter 5. The next screen displays all of the Adapter’s settings. If these are correct, you can save these settings to your hard drive by clicking Save. Click Next to continue. If these settings are not correct, click Back to change your settings. Figure 4-40: Confirm New Settings 6. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network.
Wireless-G PCI Adapter Appendi x A: Troubl eshooti ng This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G PCI Adapter. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com. Common Problems and Solutions 1. The Wireless-G PCI Adapter does not work properly.
Wireless-G PCI Adapter Frequently Asked Questions Can I run an application from a remote computer over the wireless network? This will depend on whether or not the application is designed to be used over a network. Consult the application’s user guide to determine if it supports operation over a network. Can I play computer games with other members of the wireless network? Yes, as long as the game supports multiple players over a LAN (local area network).
Wireless-G PCI Adapter What is ad-hoc mode? When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to communicate directly with each other. The ad-hoc wireless network will not communicate with any wired network. What is infrastructure mode? When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a wired network through a wireless access point.
Wireless-G PCI Adapter the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).
Wireless-G PCI Adapter Appendi x B: Usi ng Wi ndows XP Wi rel ess Confi gurati on If your computer is running Windows XP, then this choice will be available. If you want to use Windows XP Wireless Configuration to control the Adapter, instead of using the Wireless Network Monitor, then right-click on the Wireless Network Monitor and select Use Windows XP Wireless Configuration.
Wireless-G PCI Adapter 2. The screen that appears will show any available wireless network. Select the network you want. Click the Connect button. NOTE: Steps 2 and 3 are the instructions and screenshots for Windows XP with Service Pack 2 installed. If your network does not have wireless security enabled, go to step 3. If your network does have wireless security enabled, go to step 4. Figure B-4: Available Wireless Network 3.
Wireless-G PCI Adapter 4. If your network uses wireless security WEP, enter the WEP Key used into the Network Key and Confirm network key fields. If your network uses wireless security WPA Personal, enter the Passphrase used into the Network Key and Confirm network key fields. Click the Connect button. Figure B-6: Network Connection - Wireless Security NOTE: Windows XP Wireless Configuration does not support the use of a passphrase. Enter the exact WEP key used by your wireless router or access point. 5.
Wireless-G PCI Adapter Appendi x C: Wi rel ess Securi t y Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Wireless-G PCI Adapter 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network.
Wireless-G PCI Adapter WPA-Personal. If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, and enter a password in the Passphrase field of 8-63 characters. WPA2-Personal. Enter a password in the Passphrase field of 8-63 characters. WPA-Enterprise. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router or other device.) WPA Radius offers two encryption methods, TKIP and AES, with dynamic encryption keys. RADIUS.
Wireless-G PCI Adapter Appendi x D: Wi ndows Hel p All wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with an access point or wireless router, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate over a network.
Wireless-G PCI Adapter Appendi x E: Gl ossar y 802.11b - A wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. 802.11g - A wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating frequency of 2.4GHz, and backward compatibility with 802.11b devices. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network.
Wireless-G PCI Adapter DSSS (Direct-Sequence Spread-Spectrum) - Frequency transmission with a redundant bit pattern resulting in a lower probability of information being lost in transit. Encryption - Encoding data transmitted in a network. Ethernet - IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission medium.
Wireless-G PCI Adapter RADIUS (Remote Authentication Dial-In User Service) - A protocol that uses an authentication server to control network access. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. RTS (Request To Send) - A networking method of coordinating large packets through the RTS Threshold setting.
Wireless-G PCI Adapter Appendi x F: Speci fi cati ons Standards 802.11g, 802.11b, PCI 2.2 and 2.3 Transmit Power 15dBm @ 54Mbps 19dBm @ 11Mbps Sensitivity -70dBm @ 54Mbps -85dBm @ 11Mbps Security features WEP, WPA and LEAP Modulation 802.11b: CCK (11 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps); 802.11g: OFDM Network Protocol TCP/IP, IPX, NetBEUI Dimensions 4.80" x 8.46" x 0.91" (122 mm x 215 mm x 23 mm) Unit Weight 3.17 oz. (0.09 kg.) Certifications FCC, Wi-Fi Operating Temp.
Wireless-G PCI Adapter Appendi x G: Warrant y Informati on LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
Wireless-G PCI Adapter Appendi x H: Regul ator y Informati on FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless-G PCI Adapter EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.
Wireless-G PCI Adapter Appendi x I: Contact Informati on Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com or ftp.linksys.