2.4 GHz Wireless-N Notebook Adapter WIRELESS Model No.
Wireless-N Notebook Adapter Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Wireless-N Notebook Adapter Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning your Wireless Network Network Topology Roaming Network Layout Chapter 3: Getting to Know the Wireless-N Notebook Adapter The LED Indicators Chapter 4: Setting up and Connecting the Wireless-N Notebook Adapter Starting the Setup Connecting the Adapter Setting up the Adapter Chapter 5: Using the Wireless Network Monitor Accessing the Wireless Network Monitor Using the Wireless Netw
Wireless-N Notebook Adapter Appendix G: Warranty Information Appendix H: Regulatory Information Appendix I: Contact Information 50 51 58
Wireless-N Notebook Adapter List of Figures Figure 3-1: Front Panel Figure 4-1: Setup Wizard’s Welcome Screen Figure 4-2: Setup Wizard’s License Agreement Figure 4-3: Connecting the Adapter Figure 4-4: Available Wireless Networks Figure 4-5: WEP Key Needed for Connection Figure 4-6: PSK Personal Needed for Connection Figure 4-7: PSK2 Personal Needed for Connection Figure 4-8: Congratulations Figure 4-9: Available Wireless Network Figure 4-10: Network Settings Figure 4-11: Wireless Mode Figure 4-12: Ad-Hoc
Wireless-N Notebook Adapter Figure 5-7: PSK Personal Needed for Connection Figure 5-8: PSK2 Personal Needed for Connection Figure 5-9: Profiles Figure 5-10: Creating a Profile Figure 5-11: WEP Key Needed for Connection Figure 5-12: PSK Personal Needed for Connection Figure 5-13: PSK2 Personal Needed for Connection Figure 5-14: Congratulations Figure 5-15: Available Wireless Networks Figure 5-16: Network Settings Figure 5-17: Wireless Mode Figure 5-18: Ad-Hoc Mode Settings Figure 5-19: Wireless Security - W
Wireless-N Notebook Adapter Chapter 1: Introduction Welcome Thank you for choosing the Wireless-N Notebook Adapter. Setting up your network and your Wireless-N Notebook Adapter is easier than ever. adapter: a device that adds network functionality to your PC. How does the Adapter do this? Like all wireless products, the Adapter allows for greater range and mobility within your wireless network, whether it’s using the Wireless-G (802.11g) or Wireless-B (802.11b) standard.
Wireless-N Notebook Adapter • Chapter 5: Using the Wireless Network Monitor This chapter show you how to use the Adapter’s Wireless Network Monitor. • Appendix A: Troubleshooting This appendix describes some problems and solutions, as well as frequently asked questions, regarding installation and use of the Adapter. • Appendix B: Windows XP Wireless Zero Configuration This appendix describes how to use Windows XP Wireless Zero Configuration.
Wireless-N Notebook Adapter Chapter 2: Planning your Wireless Network Network Topology A wireless network is a group of computers, each equipped with one wireless adapter. Computers in a wireless network must be configured to share the same radio channel. Several PCs equipped with wireless cards or adapters can communicate with one another to form an ad-hoc network. Linksys wireless adapters also provide users access to a wired network when using an access point or wireless router.
Wireless-N Notebook Adapter Network Layout Linksys wireless access points and wireless routers have been designed for use with 802.11a, 802.11b, and 802.11g products. With 802.11g products communicating with the 802.11b standard and some products incorporating both “a” and “g”, products using these standards can communicate with each other. Access points and wireless routers are compatible with 802.11a, 802.11b and 802.
Wireless-N Notebook Adapter Chapter 3: Getting to Know the Wireless-N Notebook Adapter The LED Indicators The Network Adapter's LEDs display information about network activity. Link/Act Power Figure 3-1: Front Panel Power Green. The Power LED lights up when the Adapter is powered on. Link/Act Green. The Link/Act LED lights up when the Adapter has an active connection.
Wireless-N Notebook Adapter Chapter 4: Setting up and Connecting the Wireless-N Notebook Adapter Starting the Setup The Wireless-N Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup Wizard will install the driver and Wireless Network Monitor, as well as connect and configure the Adapter. IMPORTANT: Do not connect the Adapter until you are instructed to do so or the setup will not work. Insert the Setup Wizard CD-ROM into your CD-ROM drive.
Wireless-N Notebook Adapter Connecting the Adapter 1. Locate an available CardBus slot on your notebook PC. 2. With the connector pin end facing the CardBus slot and the label facing up, slide the Adapter into the CardBus slot until it locks in place. 3. Windows will begin copying the driver files to your computer. 4. Click Next. Setting up the Adapter The next screen to appear will be the Available Wireless Networks screen. This screen provides two options for setting up the Adapter.
Wireless-N Notebook Adapter 2. If your network has WEP, PSK, or PSK2 wireless security enabled, then that security screen will appear. Continue to the screen for your wireless security. • WEP (Wired Equivalent Privacy) If you have WEP enabled, this screen will appear. Select 64-bit or 128-bit. Then enter a passphrase or WEP key. Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated.
Wireless-N Notebook Adapter • PSK2 If your network has the wireless security PSK2 enabled, this screen will appear. Pre-shared Key - Enter a Pre-shared Key of 8-63 characters in the Pre-shared Key field. Then click Connect and proceed to Step 3. Figure 4-7: PSK2 Personal Needed for Connection 3. After the software has been successfully installed, the Congratulations screen will appear. Click Finish to exit.
Wireless-N Notebook Adapter Advanced Setup If your network is not listed with the available networks, you can use Manual Setup. 1. Click Advanced Setup on the Available Wireless Network screen to set up the adapter manually. 2. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
Wireless-N Notebook Adapter 4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen will appear. Network Mode - Select the Network Mode in which your wireless network will operate. In Mixed mode, Wireless-N, Wireless-B and Wireless-G devices can operate on the same network. In Wireless-G Only mode, no Wireless-B devices can operate in the network. Standard Channel - Select the correct channel for your wireless network.
Wireless-N Notebook Adapter WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”. Advanced Users TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box.
Wireless-N Notebook Adapter PSK+RADIUS PSK+RADIUS features PSK security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) PSK Enterprise offers two authentication methods, EAPTLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
Wireless-N Notebook Adapter PSK2+RADIUS PSK2+RADIUS features PSK2 security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) PSK2+RADIUS offers two authentication methods, EAPTLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field.
Wireless-N Notebook Adapter RADIUS RADIUS features use of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) RADIUS offers two authentication types: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional).
Wireless-N Notebook Adapter 4. The Confirm New Settings screen will appear next and show the new settings. To save the new settings, click the Save button. To edit the new settings, click the Back button. To exit the Advanced Setup through the Wireless Network Monitor, click Exit. Figure 4-22: Confirm New Settings 5. The Congratulations screen will appear next. Click Connect to Network to implement the new settings and return to the Link Information screen.
Wireless-N Notebook Adapter Chapter 5: Using the Wireless Network Monitor Use the Wireless Network Monitor to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. Accessing the Wireless Network Monitor After installing the Adapter, the Wireless Network Monitor icon will appear in the system tray of your computer. If the Wireless Network Monitor is enabled, then the icon will be green.
Wireless-N Notebook Adapter Wireless Network Status The Wireless Network Status screen provides information on your current network settings. Radio Band - This shows the radio band used on the network. Wireless Network Name- This is the unique name (SSID) of the wireless network. Wireless Mode - The mode of the wireless network currently in use is displayed here. Wide Channel - This displays the Wireless-N primary channel used with a 40 MHz radio band network.
Wireless-N Notebook Adapter Wireless Network Statistics The Wireless Networks Statistics screen provides statistics on your current network settings. Transmit Rate - This is the data transfer rate of the current connection. (In Auto mode, the Adapter dynamically shifts to the fastest data transfer rate possible at any given time.) Receive Rate - This is the rate at which data is received.
Wireless-N Notebook Adapter Connect The Connect screen displays a list of available networks in the table on the left. The table shows each network’s Wireless Network Name, Channel, and the quality of the wireless signal the Adapter is receiving. You may click Wireless Network Name, CH (Channel), or Signal, to sort by that field. Wireless Network Name - The SSID or unique name of the wireless network is displayed here. CH - This is the channel that the network uses.
Wireless-N Notebook Adapter • If the network has PSK2 wireless security enabled, then you will see the PSK2 Needed for Connection screen. Enter the network’s Pre-shared Key in the Pre-shared Key field. To connect to the network, click Connect. To cancel the connection, click Cancel. Profiles The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and Wireless Network Names.
Wireless-N Notebook Adapter Create a New Profile The next screen to appear will be the Available Wireless Networks screen. This screen provides two options for setting up the Adapter. • Available Wireless Networks. (For most users.) Use this option if you already have a network set up. The networks available to this Adapter will be listed on this screen. You can choose one of these networks and click the Connect button to connect to it.
Wireless-N Notebook Adapter the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.) WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.
Wireless-N Notebook Adapter Advanced Setup If your network is not listed with the available networks, you can use Advanced Setup. 1. Click Advanced Setup on the Available Wireless Networks screen to set up the adapter manually. Figure 5-15: Available Wireless Networks 2. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
