® A Division of Cisco Systems, Inc. 2,4 GHz 802.11g Wireless-G Notebook Adapter WIRELESS Model No.
Wireless-G Notebook Adapter with SpeedBooster Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Wireless-G Notebook Adapter with SpeedBooster Table of Contents Chapter 1: Introduction 1 Welcome What’s in this Guide? 1 2 Chapter 2: Planning your Wireless Network Network Topology Roaming Network Layout Chapter 3: Getting to Know the Wireless-G Notebook Adapter The LED Indicators Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter Starting the Setup Connecting the Adapter Setting up the Adapter Chapter 5: Using the Wireless Network Monitor Accessing the Wireless Network Monitor L
Wireless-G Notebook Adapter with SpeedBooster Appendix F: Warranty Information Appendix G: Regulatory Information Appendix H: Contact Information 55 56 63
Wireless-G Notebook Adapter with SpeedBooster List of Figures Figure 3-1: Front Panel Figure 4-1: Setup Wizard’s Welcome Screen Figure 4-2: Setup Wizard’s License Agreement Figure 4-3: Connecting the Adapter Figure 4-4: Available Wireless Network Figure 4-5: SecureEasySetup Screen Figure 4-6: SecureEasySetup Logo Figure 4-7: SecureEasySetup Logo Location Figure 4-8: SecureEasySetup Congratulations Figure 4-9: Available Wireless Network Figure 4-10: WEP Key Needed for Connection Figure 4-11: WPA - Personal
Wireless-G Notebook Adapter with SpeedBooster Figure 5-5: The SecureEasySetup button Figure 5-6: Locate the Cisco Logo Figure 5-7: Where can I find the button? Figure 5-8: The SecureEasySetup Logo and Location Figure 5-9: SecureEasySetup Figure 5-10: Site Survey Figure 5-11: WEP Key Needed for Connection Figure 5-12: WPA-Personal Needed for Connection Figure 5-13: Profiles Figure 5-14: Import a Profile Figure 5-15: Export a Profile Figure 5-16: Create a New Profile Figure 5-17: Available Wireless Network F
Wireless-G Notebook Adapter with SpeedBooster Figure 5-38: Congratulations for New Profile 38
Wireless-G Notebook Adapter with SpeedBooster Chapter 1: Introduction Welcome Thank you for choosing the Wireless-G Notebook Adapter with SpeedBooster. With this Adapter, your wireless networking experience will be faster and easier than ever. Like all wireless products, the Adapter allows for greater range and mobility within your wireless network. This adapter communicates over the 54Mbps 802.11g wireless standard, which is almost five times faster than 802.11b. But since they share the same 2.
Wireless-G Notebook Adapter with SpeedBooster What’s in this Guide? This user guide covers the steps for setting up and using the Wireless-G Notebook Adapter with SpeedBooster. • Chapter 1: Introduction This chapter describes the Adapter’s applications and this User Guide. • Chapter 2: Planning Your Wireless Network This chapter discusses a few of the basics about wireless networking. • Chapter 3: Getting to Know the Wireless-G Notebook Adapter This chapter describes the physical features of the Adapter.
Wireless-G Notebook Adapter with SpeedBooster • Appendix H: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Wireless-G Notebook Adapter with SpeedBooster Chapter 2: Planning your Wireless Network Network Topology A wireless network is a group of computers, each equipped with one wireless adapter. Computers in a wireless network must be configured to share the same radio channel. Several PCs equipped with wireless cards or adapters can communicate with one another to form an ad-hoc network. topology: the physical layout of a network.
Wireless-G Notebook Adapter with SpeedBooster Network Layout Linksys wireless access points and wireless routers have been designed for use with 802.11a, 802.11b, and 802.11g products. With 802.11g products communicating with the 802.11b standard and some products incorporating both “a” and “g”, products using these standards can communicate with each other. Access points and wireless routers are compatible with 802.11a, 802.11b and 802.
Wireless-G Notebook Adapter with SpeedBooster Chapter 3: Getting to Know the Wireless-G Notebook Adapter The LED Indicators The Network Adapter's LEDs display information about network activity. Figure 3-1: Front Panel Power Green. The Power LED lights up when the Adapter is powered on. Link Green. The Link LED lights up when the Adapter has an active connection.
Wireless-G Notebook Adapter with SpeedBooster Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter Starting the Setup The Wireless-G Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup Wizard will install the driver and Wireless Network Monitor, as well as connect and configure the Adapter. IMPORTANT: Do not connect the Adapter until you are instructed to do so or the setup will not work. Insert the Setup Wizard CD-ROM into your CD-ROM drive.
Wireless-G Notebook Adapter with SpeedBooster Connecting the Adapter 1. Locate an available CardBus slot on your notebook PC. 2. With the connector pin end facing the CardBus slot and the label facing up, slide the Adapter into the CardBus slot until it locks in place. 3. Windows 98 and Windows Me users may need to restart their PCs again when prompted to do so. The Power LED should light up when the Adapter is installed correctly. 4. Windows will begin copying the driver files to your computer.
Wireless-G Notebook Adapter with SpeedBooster Setting Up the Adapter with SecureEasySetup With SecureEasySetup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the SecureEasySetup button on the device you’re connecting the Adapter to, such as a wireless router or access point. 1. Starting from the Available Wireless Network screen, click the SecureEasySetup button on the right hand side. Figure 4-5: Locate the Button 2.
Wireless-G Notebook Adapter with SpeedBooster 4. When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your network. Congratulations! The setup is complete. To check the link information, search for available wireless networks, or make additional configuration changes, refer to Chapter 5: Using the Wireless Network Monitor.
Wireless-G Notebook Adapter with SpeedBooster 2. If your network has the wireless security WEP (Wired Equivalent Privacy) enabled, this screen will appear. Select 64-bit or 128-bit. Then enter a passphrase or WEP key. Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters.
Wireless-G Notebook Adapter with SpeedBooster 3. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network. For more information about the Wireless Network Monitor, refer to Chapter 5: Using the Wireless Network Monitor. Congratulations! The setup is complete.
Wireless-G Notebook Adapter with SpeedBooster 2. The Network Settings screen from the Wireless Network Monitor will appear. If your network has a router or other DHCP server, click the radio button next to Obtain network settings automatically (DHCP). If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network.
Wireless-G Notebook Adapter with SpeedBooster Select the correct operating channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting. Click the Next button. Click the Back button to change any settings. 5. If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 6.
Wireless-G Notebook Adapter with SpeedBooster TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box. Authentication -The default is set to Auto, so it will auto-detect for Shared Key or Open System authentication. For Shared Key authentication, both the sender and the recipient share a WEP key for authentication.
Wireless-G Notebook Adapter with SpeedBooster WPA Enterprise WPA Enterprise features WPA security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA Enterprise offers two authentication methods, EAPTLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
Wireless-G Notebook Adapter with SpeedBooster RADIUS RADIUS features use of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) RADIUS offers two authentication types: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional).
Wireless-G Notebook Adapter with SpeedBooster LEAP If you selected LEAP, then enter the Username and Password that will authenticate you on your wireless network. Username - Enter the username used for authentication. Password - Enter the password used for authentication. Confirm - Enter the password again. Click the Next button to continue, or click the Back button to return to the previous screen. Figure 4-23: Wireless Security - LEAP 6.
Wireless-G Notebook Adapter with SpeedBooster 7. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network. Clicking Return to Profile will open the Wireless Network Monitor’s Profiles screen. For more information about the Wireless Network Monitor, refer to Chapter 5: Using the Wireless Network Monitor. Congratulations! The setup is complete.
Wireless-G Notebook Adapter with SpeedBooster Chapter 5: Using the Wireless Network Monitor Use the Wireless Network Monitor to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. Accessing the Wireless Network Monitor After installing the Adapter, the Wireless Network Monitor icon will appear in the system tray of your computer. If the Wireless Network Monitor is enabled, then the icon will be green.
Wireless-G Notebook Adapter with SpeedBooster Wireless Network Status The Wireless Network Status screen provides information on your current network settings. Status - This shows the status of the wireless network connection. SSID - This is the unique name of the wireless network. Wireless Mode - The mode of the wireless network currently in use is displayed here. Transfer Rate - The data transfer rate of the current connection is shown here.
Wireless-G Notebook Adapter with SpeedBooster Wireless Network Statistics The Wireless Networks Statistics screen provides statistics on your current network settings. Transmit Rate - This is the data transfer rate of the current connection. (In Auto mode, the Adapter dynamically shifts to the fastest data transfer rate possible at any given time.) Receive Rate - This is the rate at which data is received.
Wireless-G Notebook Adapter with SpeedBooster SecureEasySetup While using the Monitor, you might see the SecureEasySetup button on the right-hand side of the screen. This button can be used to set up the Adapter, if this has not already been done. With SecureEasySetup, setting up the Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the SecureEasySetup button on the device you’re connecting the Adapter to, such as a wireless router or access point.
Wireless-G Notebook Adapter with SpeedBooster 2. Press the Router or Access Point’s SecureEasySetup button on its front panel. After approximately two to ten seconds, the button will turn white and begin to blink. If your other SecureEasySetup device is not yet installed, Click the Next button to continue and finish the Router’s installation. Then, to install the other device, follow the instructions provided with that device for SecureEasySetup.
Wireless-G Notebook Adapter with SpeedBooster Site Survey The Site Survey screen displays a list of available networks in the table on the left. The table shows each network’s SSID, Channel, and the quality of the wireless signal the Adapter is receiving. You may click SSID, CH (Channel), or Signal, to sort by that field. SSID - The SSID or unique name of the wireless network is displayed here. CH - This is the channel that the network uses.
Wireless-G Notebook Adapter with SpeedBooster Profiles The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and SSIDs. Profile - The name of the profile is displayed here. SSID - The SSID or unique name of the wireless network is displayed here.
Wireless-G Notebook Adapter with SpeedBooster Creating a New Profile On the Profiles screen, click the New button to create a new profile. Enter a name for the new profile, and click the OK button. Click the Cancel button to return to the Profiles screen without entering a name. The Available Wireless Network screen will appear. This screen provides three options for setting up the Adapter • SecureEasySetup. This Adapter features SecureEasySetup.
Wireless-G Notebook Adapter with SpeedBooster Setting Up the Adapter with SecureEasySetup While using the Monitor, you might see the SecureEasySetup button on the right-hand side of the screen. This button can be used to set up the Adapter, if this has not already been done. With SecureEasySetup, setting up the Adapter is as simple as pushing a couple of buttons.
Wireless-G Notebook Adapter with SpeedBooster 2. Press the Gateway’s SecureEasySetup button on its front panel. After approximately two seconds, the button will turn white and begin to blink. If your other SecureEasySetup device is not yet installed, Click the Next button to continue and finish the Router’s installation. Then, to install the other device, follow the instructions provided with that device for SecureEasySetup.
Wireless-G Notebook Adapter with SpeedBooster Chapter 5: Using the Wireless Network Monitor Click Exit to close the Setup Wizard.
Wireless-G Notebook Adapter with SpeedBooster Setting Up the Adapter with Available Networks If you’re not setting up the Adapter with SecureEasySetup, another method for setting up the Adapter is with the available networks listed on the Available Wireless Network screen. The available networks are listed in the table on the center of the screen by SSID. Select the wireless network you wish to connect to and click the Connect button.
Wireless-G Notebook Adapter with SpeedBooster If your network has the wireless security WPA Personal (Wi-Fi Protected Access) enabled, this screen will appear. Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.
Wireless-G Notebook Adapter with SpeedBooster DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here. Click the Next button to continue, or click the Back button to return to the previous screen. 2. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point.
Wireless-G Notebook Adapter with SpeedBooster If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 5. If your wireless network has wireless security, select the method of security used: WEP, WPA-Personal, WPA-Enterprise, RADIUS, or LEAP. WEP stands for Wired Equivalent Privacy, and WPA stands for Wi-Fi Protected Access. WPA is a stronger security method than WEP.
Wireless-G Notebook Adapter with SpeedBooster WPA Personal WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select TKIP or AES for encryption. Then enter a Passphrase that is 8-63 characters in length. Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
Wireless-G Notebook Adapter with SpeedBooster WPA Enterprise WPA Enterprise features WPA security used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) WPA Enterprise offers two authentication methods, EAPTLS and PEAP, as well as two encryption methods, TKIP and AES, with dynamic encryption keys. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
Wireless-G Notebook Adapter with SpeedBooster RADIUS RADIUS features use of a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) RADIUS offers two authentication types: EAP-TLS and PEAP. Authentication - Select the authentication method your network is using, EAP-TLS or PEAP. EAP-TLS If you selected EAP-TLS, enter the login name of your wireless network in the Login Name field. Enter the name of the authentication server in the Server Name field (this is optional).
Wireless-G Notebook Adapter with SpeedBooster LEAP If you selected LEAP, then enter the Username and Password that will authenticate you on your wireless network. Username - Enter the username used for authentication. Password - Enter the password used for authentication. Confirm - Enter the password again. Click the Next button to continue, or click the Back button to return to the previous screen. Figure 5-36: Wireless Security - RADIUS Using PEAP for New Profile 3.
Wireless-G Notebook Adapter with SpeedBooster 4. The Congratulations screen will appear next. Click Connect to Network to implement the new settings immediately and return to the Link Information screen. Click Return to Profiles Screen to keep the current settings active and return to the Profiles screen. You have successfully created a connection profile. Figure 5-38: Confirm New Settings for New Profile Chapter 5: Using the Wireless Network Monitor Click Exit to close the Setup Wizard.
Wireless-G Notebook Adapter with SpeedBooster Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G Notebook Adapter. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com/international. Common Problems and Solutions 1.
Wireless-G Notebook Adapter with SpeedBooster Frequently Asked Questions Can I run an application from a remote computer over the wireless network? This will depend on whether or not the application is designed to be used over a network. Consult the application’s user guide to determine if it supports operation over a network. Can I play computer games with other members of the wireless network? Yes, as long as the game supports multiple players over a LAN (local area network).
Wireless-G Notebook Adapter with SpeedBooster maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a system, the user’s end node undertakes a search for the best possible access to the system.
Wireless-G Notebook Adapter with SpeedBooster Would the information be intercepted while transmitting on air? WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security feature of scrambling. On the software side, WLAN offers the encryption function (WEP) to enhance security and access control.
Wireless-G Notebook Adapter with SpeedBooster Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Wireless-G Notebook Adapter with SpeedBooster 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.
Wireless-G Notebook Adapter with SpeedBooster WPA-Personal. If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, and enter a password in the Passphrase field of 8-63 characters. WPA-Enterprise. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router or other device.) WPA-Enterprise offers two encryption methods, TKIP and AES, with dynamic encryption keys. RADIUS. WEP used in coordination with a RADIUS server.
Wireless-G Notebook Adapter with SpeedBooster Appendix C: Windows Help All wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with an access point or wireless router, TCP/IP must be enabled.
Wireless-G Notebook Adapter with SpeedBooster Appendix D: Glossary 802.11a - An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps and an operating frequency of 5GHz. 802.11b - An IEEE wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. 802.11g - An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating frequency of 2.
Wireless-G Notebook Adapter with SpeedBooster Buffer - A shared or assigned memory area that is used to support and coordinate different computing and networking activities so one isn't held up by the other. Byte - A unit of data that is usually eight bits long Cable Modem - A device that connects a computer to the cable television network, which in turn connects to the Internet. CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) - A method of data transfer that is used to prevent data collisions.
Wireless-G Notebook Adapter with SpeedBooster DTIM (Delivery Traffic Indication Message) - A message included in data packets that can increase wireless efficiency. Dynamic IP Address - A temporary IP address assigned by a DHCP server. EAP (Extensible Authentication Protocol) - A general authentication protocol used to control network access. Many specific authentication methods work within this framework.
Wireless-G Notebook Adapter with SpeedBooster IEEE (The Institute of Electrical and Electronics Engineers) - An independent institute that develops networking standards. Infrastructure - A wireless network that is bridged to a wired network via an access point. IP (Internet Protocol) - A protocol used to send data over a network. IP Address - The address used to identify a computer or device on a network.
Wireless-G Notebook Adapter with SpeedBooster OFDM (Orthogonal Frequency Division Multiplexing) - Frequency transmission that separates the data stream into a number of lower-speed data streams, which are then transmitted in parallel to prevent information from being lost in transit. Packet - A unit of data sent over a network. Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products.
Wireless-G Notebook Adapter with SpeedBooster Software - Instructions for the computer. A series of instructions that performs a particular task is called a "program". SOHO (Small Office/Home Office) - Market segment of professionals who work at home or in small offices. SPI (Stateful Packet Inspection) Firewall - A technology that inspects every incoming packet of information before allowing it to enter the network.
Wireless-G Notebook Adapter with SpeedBooster UDP (User Datagram Protocol) - A network protocol for transmitting data that does not require acknowledgement from the recipient of the data that is sent. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network. URL (Uniform Resource Locator) - The address of a file located on the Internet.
Wireless-G Notebook Adapter with SpeedBooster Appendix E: Specifications Standards IEEE 802.11g, IEEE 802.11b, CardBus Channels 11 Channels (Most of North, South, and Central America) 13 Channels (Most of Europe, and Asia) LEDs Power, Link Transmit Power 18 dBm Protocols 802.11b: CCK (11 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps); 802.11g: OFDM Security Features WEP, AES, TKIP, 802.1x WEP Key Bits 64, 128 Bit Dimensions 115 mm x 54 mm x 7.5 mm Unit Weight 0.
Wireless-G Notebook Adapter with SpeedBooster Appendix F: Warranty Information Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
Wireless-G Notebook Adapter with SpeedBooster Appendix G: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless-G Notebook Adapter with SpeedBooster Compliance Information for 2.
Wireless-G Notebook Adapter with SpeedBooster NOTE: For all products, the Declaration of Conformity is available through one or more of these options: • A pdf file is included on the product's CD. • A print copy is included with the product. • A pdf file is available on the product's webpage. Visit www.linksys.com/international and select your country or region. Then select your product. If you need any other technical documentation, see the “Technical Documents on www.linksys.
Wireless-G Notebook Adapter with SpeedBooster CE Marking For the Linksys Wireless-B and Wireless-G products, the following CE mark, notified body number (where applicable), and class 2 identifier are added to the equipment. or or Check the CE label on the product to find out which notified body was involved during the assessment.
Wireless-G Notebook Adapter with SpeedBooster France In case the product is used outdoors, the output power is restricted in some parts of the band. See Table 1 or check http://www.art-telecom.fr/ for more details. Dans la cas d’une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Reportezvous à la table 1 ou visitez http://www.art-telecom.fr/ pour de plus amples détails.
Wireless-G Notebook Adapter with SpeedBooster Power Output of Your Device To comply with your country’s regulations, you may have to change the power output of your wireless device. Proceed to the appropriate section for your device. NOTE: The power output setting may not be available on all wireless products. For more information, refer to the documentation on your product’s CD or http://www.linksys.com/international. Wireless Adapters Wireless adapters have the power output set to 100% by default.
Wireless-G Notebook Adapter with SpeedBooster Technical Documents on www.linksys.com/international Follow these steps to access technical documents: 1. Browse to http://www.linksys.com/international. 2. Click the region in which you reside. 3. Click the name of the country in which you reside. 4. Click Products. 5. Click the appropriate product category. 6. Select a product. 7. Click the type of documentation you want. The document will automatically open in PDF format.
Wireless-G Notebook Adapter with SpeedBooster Appendix H: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com Belgium support.be@linksys.com Denmark support.dk@linksys.com France support.fr@linksys.com Germany support.de@linksys.