User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Getting to Know the PrintServer
- Chapter 3: Connecting the PrintServer
- Chapter 4: Configuring the PrintServer Using the Setup Wizard
- Chapter 5: Windows Driver Installation
- Chapter 6: Configuring the PrintServer Using the Web-based Utility
- Chapter 7: Bi-Admin Management
- Chapter 8: Internet Printing Protocol (IPP)
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: About Bi-Directional Printing
- Appendix D: Upgrading Firmware
- Appendix E: Windows Help
- Appendix F: Glossary
- Appendix G: Specifications
- Appendix H: Warranty Information
- Appendix I: Regulatory Information
- Appendix J: Contact Information
10
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Wireless-G PrintServer with Multifunction Printer Support
6. From the Connecting Your PrintServer screen, you will connect your Ethernet port.
The Ethernet connection is for configuration purposes only. Later in this installation, you will need to
disconnect the ethernet cable and reconnect your PrintServer, printer, and router.
Click Next to continue. Click Back to return to the previous screen.
7. Connect the Power Adapter to the PrintServer and click Next.
Figure 4-5: Connect the PrintServer
Figure 4-6: Connect the PrintServer