User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Getting to Know the PrintServer
- Chapter 3: Connecting the PrintServer
- Chapter 4: Configuring the PrintServer Using the Setup Wizard
- Chapter 5: Windows Driver Installation
- Chapter 6: Configuring the PrintServer Using the Web-based Utility
- Chapter 7: Bi-Admin Management
- Chapter 8: Internet Printing Protocol (IPP)
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: About Bi-Directional Printing
- Appendix D: Upgrading Firmware
- Appendix E: Windows Help
- Appendix F: Glossary
- Appendix G: Specifications
- Appendix H: Warranty Information
- Appendix I: Regulatory Information
- Appendix J: Contact Information
18
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Wireless-G PrintServer with Multifunction Printer Support
19. Reconnect the power to the PrintServer and click Next.
Wait a few moments while the system checks for the network.
20. The PrintServer is now connected to your wireless network properly.
The order used in reconnecting your PrintServer, router, and printer is very important. If you may have
reconnected improperly, please click Back and review your processes.
Figure 4-21: Reconnect the PrintServer
Figure 4-22: PrintServer connection complete