User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Getting to Know the PrintServer
- Chapter 3: Connecting the PrintServer
- Chapter 4: Configuring the PrintServer Using the Setup Wizard
- Chapter 5: Windows Driver Installation
- Chapter 6: Configuring the PrintServer Using the Web-based Utility
- Chapter 7: Bi-Admin Management
- Chapter 8: Internet Printing Protocol (IPP)
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: About Bi-Directional Printing
- Appendix D: Upgrading Firmware
- Appendix E: Windows Help
- Appendix F: Glossary
- Appendix G: Specifications
- Appendix H: Warranty Information
- Appendix I: Regulatory Information
- Appendix J: Contact Information
Wireless-G PrintServer with Multifunction Printer Support
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this Guide? 2
Chapter 2: Getting to Know the PrintServer 4
The Bottom Panel 4
The Front Panel 5
Chapter 3: Connecting the PrintServer 6
Overview 6
Connecting the PrintServer to Your Network 6
Placement Options 7
Chapter 4: Configuring the PrintServer Using the Setup Wizard 8
Installation 8
Chapter 5: Windows Driver Installation 20
Overview 20
Installation 20
Configuration of the PrintServer Driver 22
Chapter 6: Configuring the PrintServer Using the Web-based Utility 25
Overview 25
The Setup Tab 26
The Protocol Tab - TCP/IP 27
The Protocol Tab - AppleTalk 28
The Protocol Tab - NetBEUI 29
The Protocol Tab - SNMP 30
The Wireless Tab - Basic 31
The Wireless Tab - Security 32
The Printer Tab - Internet Printing 33
The Printer Tab - Logical Port 34
The Status Tab - Device 35
The Status Tab - Printer 36
The Status Tab - Wireless 36
The Exit Tab 36