Advanced Configuration ins preen fe SE i Port Services To add a service, enter the service's name in the Service Name field. Select its protocol from the Protocol drop down menu, and enter its range in the Port Range fields Then click Add, To modify a service, select it from the fist on the right, Change its name, protocol setting, or port range. Then click Modify. To delete a service, select it from the fist on the right.
Advanced Configuration Feign Hyphenation and Gaming » Port Triggering Port Triggering Application Enter the application name of the trigger. Triggered Range For each application, list the triggered port number range. Check with the Internet application documentation for the port number(s) needed. Start Port Entertaining port number of the Triggered Range. End Port Enter the ending port number of the Triggered Range. Forwarded Range For each application, list the forwarded port number range.
Applications and Gaming » (205 Device Priority Enter the name of your network device in the Device name field, enter its MAC Address, and then select its priority from the drop-down menu. Ethernet Port Priority Ethernet Port Priority QoS allows you to prioritize performance the Router’ four ports, LAN Ports 1-4. For ach port, select the priority and flow control setting. Priority Select High or Low in the Priority column, The Router’s four ports have been assigned low priority by default.
Router Password Local Router Access Router Password Enter a new Password for the Router, He-ante to confirm Enter the Password again to confirm. Web Access Access Server HTTP (Hyper Text Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web, HTTP uses SSL {Secured Socket Layer) to encrypt data transmitted for higher security. Select HTTP or HTTP. The default selection is HTTP.
Advanced Configuration if the test was successful. To stop the test, click Stop. Click Clear Log to clear the screen, Click Cl's to rectum to the Diagnostics screen. The Trace route Test Administration > Factory Defaults The Administration > Factory Defaults screen allows you to restore the Routers configuration to its factory default settings. Factory Defaults Restore Factory Defaults To reset the Routers settings to the default values, select Yes, and then click Save Settings.
Status > Router The Stats > Router screen displays the Routers current status, Man dh i A Status >» Router Router Information Firmware Version This is the Router’s current firmware. Current Time This shows the time, as you set on the Setup tab. MAC Address This is the Router's MAC Address, as seen by your ISP. fourteen Name This is the specific name for the Routs, which you set on the Setup tab. Host Name If required by your 158 this would have been entered on the Setup tab.
Status > Wireless The Status >» Wireless screen displays the status of your wireless network. Status > Wireless Wireless BAL Address This is the Routers MAC Address, as seen on your local, wireless network. Mode As selected from the Wireless > Basic Wireless Settings screen, this displays the wireless mode (Mixed, G Only, or Disabled) used by the network, SSH As entered on the Wireless > Basic Wireless Settings screen, this displays the wireless network name or S510.
fe Appendix A: Troubleshooting Your computer cannot connect to the Internet. Follow these instructions until your computer can connect to the Internet: * Make sure that the Router is powered oni. The Power LED should be green and not flashing. ® if the Power LED is flashing, then power off all of your network devices, including the modem, Router, and computers. Then power on each device in the following order: 1. Cable or DSL modem 2. Router 3. Computer s Check the cable connections.
Appendix Specifications Mode} WRTS4G2 Standards IEEE 802.3, REEF 802.34, Ports Button LED Cabling Type Number of Antennas RF Power Output Upon able/cert Security Features Wireless Security Environmental Dimensions Weight Power Certifications Operating Temp. Storage Temp. Operating Humidity Storage Humidity B: IEEE 802.110, IEEEB02.
Warranty Information Appendix C: Warranty Information Limited Warranty Links warrants this Links hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original end-user purchaser and Lasts for the period specified below: «One (1) year for new product = Ninety (90) days for refurbished product This limited warranty Is non-transferable and extends only to the original end-user purchaser.
Warranty Information rejected. Do not include any other items with the product you are returning to Links. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge. Cornerstone outside of the United States of America and Canada are responsible for ali shipping and handling charges, custom duties, VAT and other associated taxes and charges.
Regulatory Information Appendix D: Regulatory information FC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Se Appendix E: Software License Agreement Software in Links Products This product from Cleo-Linksys LLC or fom one of its affiliates Cisco Systems-Links (Asia) Pre (xd. or Scoliosis KKK. ("Slinky) contains software (including firmware) originating from Links and its suppliers and may also contain software from the open source community. Any software originating from Links and its suppliers is licensed under the Links Software License Agreement contained at Schedule 1 below.
Se used in accordance with the terms of this Agreement; (iil) to provide improvements to the way Links delivers technology to you and to other Links customers; (iv) to enable Links to comply with the terms of any agreements it has with any third parties regarding your Links product and/or Software and/or (v) to enable Links to comply with aif applicable laws and/or regulations, or the requirements of any regulatory authority or government agency.
Se freedom to share and change free software~to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. {Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead) You can apply {to your programs, too. When we speak of free software, we are referring to freedom, not price.
Se ©. if the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or ele, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
consequence of a court judgment or allegation of patent infringement or for any other reason {put limited to patent issues), conditions are imposed on yous {whether by court order, agreement or otherwise) that contradict the conditions of this License, they do net excuse you from the conditions of this License, if you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all.
Se This product includes software written by Tim Hudson {tjh@oryptseftcom). In addition, if this Links product contains open source software licensed under the Slope license then the license germs below in this Schedule 3 will apply to that open source software The license terms below in this Schedule 3 are from the public web site at i The Slope toolkit stays under a dual license, Le.
Se The word Cryptography’ can be left out if the routines from the library being used are net cryptography related. 4.