Wireless-B USB Network Adapter Chapter 6: Driver Installation and Configuration for Windows XP After connecting the Adapter to your computer, you will install the driver and configure the Adapter. IMPORTANT: Do NOT run the Wireless-B USB Network Adapter Setup Wizard. If the Setup Wizard runs automatically after the Setup CD-ROM has been inserted, click the Exit button. 1. Windows XP will automatically detect the Adapter. Insert the Setup CD-ROM into your CD-ROM drive.
Wireless-B USB Network Adapter Windows XP Wireless Zero Configuration NOTE: Windows XP has a built-in configuration tool. Use Windows XP Wireless Zero Configuration (in the system tray at the bottom of your screen) to configure the Adapter. 1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your computer’s system tray. Double-click the icon.
Wireless-B USB Network Adapter 3. If WEP is enabled, enter the WEP key of your wireless network in the Network key field, and re-enter it in the Confirm network key field. Then, click the Connect button, and go to step 4. NOTE: Windows XP Wireless Zero Configuration does not support the use of a passphrase. Enter the exact WEP key used by your access point. Figure 6-5: Zero Configuration Connection with WEP 4. The Zero Configuration icon will show a wireless connection when your connection is active.
Wireless-B USB Network Adapter Chapter 7: Using the WLAN Monitor for Windows 98SE, Me, and 2000 Use the WLAN Monitor to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. IMPORTANT: Windows XP users. Windows XP has a built-in configuration tool. Use the Windows XP Wireless Zero Configuration (in the system tray at the bottom of your screen) to configure the Adapter.
Wireless-B USB Network Adapter Wireless Network Status Status - The status of the wireless network connection. SSID - The SSID of the wireless network. Network Mode - The wireless mode currently in use. Transfer Rate - The data transfer rate of the current connection. Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature. MAC - The MAC address of the wireless network’s access point.
Wireless-B USB Network Adapter Site Survey The Site Survey screen displays a list of infrastructure and ad-hoc networks available for connection in the table on the right. This table shows the network’s SSID and the quality of the wireless signal the Adapter is receiving. Site Information For each network selected, the following settings are listed: Network Mode - The wireless mode currently in use. Channel - The channel to which the wireless network devices are set.
Wireless-B USB Network Adapter Profiles The Profiles screen lets you save different configuration profiles for different network setups. The table on the right displays a list of infrastructure and ad-hoc networks available for connection This table shows the network’s profile name and the wireless network’s SSID, as set in the connection profile. Profile Information For each profile selected, the following are listed: Network Mode - The mode of the wireless network currently in use.
Wireless-B USB Network Adapter Import - Click the Import button to import a profile that has been saved in another location. Select the appropriate file, and click the Open button. Figure 7-7: Importing a Profile Export - Select the profile you want to save in a different location, and click the Export button. Direct Windows to the appropriate folder, and click the OK button. NOTE: If you want to export more than one profile, you have to export them one at a time.
Wireless-B USB Network Adapter Creating a New Profile 1. On the Profiles screen, click the New button to create a new profile. Figure 7-9: Creating a New Profile 2. Enter a name for the new profile, and click the OK button. Click the Cancel button to return to the Profiles screen.
Wireless-B USB Network Adapter 3. The Network Setting screen will appear next. If your network has a DHCP server, click the radio button next to Obtain an IP address automatically (DHCP). Click the Next button to continue, or click the Cancel button to return to the Profiles screen. If your network does not have a DHCP server, click the radio button next to Specify the IP Address. Enter an IP Address, Subnet Mask, Default Gateway, and DNS appropriate for your network.
Wireless-B USB Network Adapter 5. If you chose Infrastructure Mode, then proceed to step 6. If you chose Ad-Hoc Mode, then the Wireless Channels screen will now appear. Select the channel at which the network broadcasts its wireless signal. Then, click the Next button to continue or the Back button to return to the previous screen. Channel - From the drop-down box, select the appropriate channel that corresponds with your network settings.
Wireless-B USB Network Adapter 7. The Confirm New Settings screen will appear next shown the new settings. To save the new settings, click the Yes button. To edit the new settings, click the Back button. Figure 7-15: Confirm New Settings for New Profile 8. The Congratulations screen will appear next. Click Activate new settings now to implement the new settings immediately and return to the Link Information screen.
Wireless-B USB Network Adapter Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-B USB Network Adapter. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com. Common Problems and Solutions 1.
Wireless-B USB Network Adapter Frequently Asked Questions Can I run an application from a remote computer over the wireless network? This will depend on whether or not the application is designed to be used over a network. Consult the application’s user guide to determine if it supports operation over a network. Can I play computer games with other members of the wireless network? Yes, as long as the game supports multiple players over a LAN (local area network).
Wireless-B USB Network Adapter maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a system, the user’s end node undertakes a search for the best possible access to the system.
Wireless-B USB Network Adapter Would the information be intercepted while transmitting on air? WLAN features two-fold protection in security. On the hardware side, as with Direct Sequence Spread Spectrum technology, it has the inherent security feature of scrambling. On the software side, WLAN offers the encryption function (WEP) to enhance security and access control. What is WEP? WEP is Wired Equivalent Privacy, a data privacy mechanism based on a shared key algorithm, as described in the IEEE 802.
Wireless-B USB Network Adapter Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Wireless-B USB Network Adapter 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network.
Wireless-B USB Network Adapter between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the encryption keys. WPA RADIUS. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router or other device.) First, select the type of WPA algorithm, TKIP or AES. Enter the RADIUS server’s IP Address and port number, along with a key shared between the device and the server.
Wireless-B USB Network Adapter Appendix C: Windows Help All wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with an access point or wireless router, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate over a network.
Wireless-B USB Network Adapter Appendix D: Glossary 802.11b - An IEEE wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. Adapter - A device that adds network functionality to your PC. Ad-hoc - A group of wireless devices communicating directly with each other (peer-to-peer) without the use of an access point. Backbone - The part of a network that connects most of the systems and networks together, and handles the most data.
Wireless-B USB Network Adapter Fragmentation -Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet. Hardware - The physical aspect of computers, telecommunications, and other information technology devices. IEEE (The Institute of Electrical and Electronics Engineers) - An independent institute that develops networking standards. Infrastructure - A wireless network that is bridged to a wired network via an access point.
Wireless-B USB Network Adapter Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services. Software - Instructions for the computer. A series of instructions that performs a particular task is called a "program". Spread Spectrum - Wideband radio frequency technique used for more reliable and secure data transmission. SSID (Service Set IDentifier) - Your wireless network's name.
Wireless-B USB Network Adapter Appendix E: Specifications Standards IEEE 802.11b, USB 1.1 Channels 11 Channels (USA, Canada) 13 Channels (Europe) 14 Channels (Japan) Port USB Type B Transmit Power 18 dBm (typical) Receive Sensitivity -85 dBm (typical) Modulation CCK, DQPSK, DBPSK OS Support Windows 98SE, Me, 2000, and XP Network Protocols TCP/IP, IPX/SPX, NetBEUI LEDs Power, Link Security Features WEP Encryption WEP Key Bits 64, 128 Bit Dimensions 3.98" x 0.91" x 3.
Wireless-B USB Network Adapter Storage Humidity Appendix E: Specifications 10% to 90%, Non-Condensing 39
Wireless-B USB Network Adapter Appendix F: Warranty Information LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
Wireless-B USB Network Adapter Appendix G: Regulatory Information FCC STATEMENT This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless-B USB Network Adapter EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.
Wireless-B USB Network Adapter Cisco-Linksys, LLC declares that WUSB11v4 ( FCC ID: Q87-WUSB11V4 ) is limited in CH1~CH11 by specified firmware controlled in U.S.A. SAFETY NOTICES Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Wireless-B USB Network Adapter Appendix H: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com or ftp.linksys.
