Quick Start Manual

F. The Setup Wizard will ask
you to review your settings
before it starts to copy files.
Click Next if you are satis-
fied with your settings, or
click Back to change any
settings.
G. After the files have been
successfully copied, you
will see Figure G. Click the
Exit button.
Proceed to Step 2.
WUSB12
System Requirements
One PC with the following:
• 90MHz or Higher CPU
• Minimum 32MB RAM
• Windows 98SE, Me, 2000, or XP
• Available USB Port
• CD-ROM Drive
Package Contents
• One Wireless Compact USB Adapter (1)
• One USB Extension Cable (2)
• One Setup Wizard CD-ROM with User
Guide (3)
• One Neck Strap
• One Quick Installation guide
• One Registration Card
Continued on back
This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,
configuration, and further setup options, please consult the User Guide.
Instant Wireless™ Series
WWiirreelleessss CCoommppaacctt UUSSBB AAddaapptteerr
A. Insert the Setup Wizard CD-
ROM into your CD-ROM
drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear. If it does not, click
Start and choose Run. In the
field that appears, enter
D:\setup.exe (where “D” is
the letter of your CD-ROM
drive).
B. Click the Install button.
C. After reading the License
Agreement, click Next if you
agree, or Cancel to end the
installation.
Software Installation and Configuration
for Windows 98SE, Me, and 2000
Important to Windows 98SE, Me, and 2000 users: You must run the Setup
Wizard to install the software before installing the hardware.
A
Important to Windows XP users: Do NOT run the Setup Wizard. Go to Step 2.
D. The Setup Wizard will ask you to choose a wireless mode. Click the
Infrastructure Mode radio button if you want your wireless computers to
network with computers on your wired network using a wireless access
point. Click the Ad-Hoc Mode radio button if you want multiple wireless
computers to network directly with each other.
In the SSID field, enter the
SSID of your wireless net-
work. The SSID must be
identical for all devices in the
network. The default setting
is linksys (all lowercase).
Click Next.
E. If you chose Infrastructure
Mode, go to Step F now. If
you chose Ad-Hoc Mode,
select the correct operating
channel for your network.
The channel you choose
should match the channel set
on the other devices in your
wireless network. Click Next
and go to Step F.
D
E
F
Installation of the WUSB12 is differ-
ent for different versions of Windows.
Read the following to know which
steps you should follow for your
Windows operating system.
• For Windows 98SE, Me, and 2000, go to
Step 1 and then Step 2.
• For Windows XP, go to Step 2 and then
Step 3.
C
G